Installations in Commercial and Residential Audio/Video, Security, and Broadband markets will be a "snap", thanks to the low compression force associated with traditional Snap-N-Seal connectors along with the patented non-blind entry with a floating pin design from F-Conn.

A patented 360° floating-pin basket is incorporated into the design of the ProSNS RG6. By positioning the pin basket at the back end of the connector, the insertion of the cable center conductor is easier and more accurate. Once the pin basket is properly seated inside the connector, it is then compressed around the cable center conductor by an outer plastic sleeve.

Features:

A patented internal "O" ring permits nut to spin freely while protecting against water migration

Patented guide sleeve (F) eliminate blind entry simplifying and providing consistent cable Insertion

Sleeves' sealing "O" ring prevents moisture migration

Patented, industry leading, removable sleeve reduces compression force

Specifications:

Quantity: 25 pieces

Connector Type: Right Angle F

Cable Type: RG6 Standard or Quad

Cable Center Conductor Diameter Limits: .0399 - .0418 inch

Cable Dielectric Diameter Limits: .180 - .193 inch

Cable Outer Jacket Diameter Limits: .265 - .305 inch

Cable Insertion Force: 20 lbf

Frequency: ≥-30 dB up to 1 GHz typical

Impedance: 75Ohm

Nut: Nickel/Tin Plated Brass

O-Ring: Ethylene Propylene

Body: Nickel/Tin Plated Brass

Contact: Gold Plated

Locking: No

Tool Compatibility: CPLCCT-SLMR or CPSNSCT-596 (compression), PSA59/6 (strip)

Termination Type: Compression

Environmental Space: Indoor/Outdoor

EU CE Mark: Yes

Suitability Indoor/Outdoor: Both Yes

Plenum (Y/N): No

Salt Fog: Passes 1000 hours ANSI/SCTE 143 2007

RFI Shielding: -85 dB (60% bonded foil)