One of the largest requests we get at Tech Tool Supply is "Do you have a cable mapper that goes through splitters?" After many years of saying no, we can finally say YES! The Coax Genius!
The Coax Genius simplifies toning and mapping by quickly finding point A and point B of any RF distribution system regardless of what components are installed between. It tones and maps through splitters, taps, diplexers, amplifiers, line extenders, and virtually any RF component. With additional Remotes, the Coax Genius can map up to eight locations at a single time.
With additional Remotes, the Coax Genius can map up to eight locations at a single time. The Coax Genius is also available in a 1 Remote Kit and an 8 Remote Kit.
Need to check for CATV Splitters? Once the Receiver finds the Remote, the Coax Genius will indicate if there are CATV components, such as a splitter, between the Receiver and Remote.
Work on DirecTV or DISH Systems? In addition to mapping, the Coax Genius will indicate when there is DC voltage present and the exact voltage found. It can also determine if the path from the Remote to the Receiver passes DC voltage.
Modes: The Coax Genius comes equipped with three different modes designed to help map and troubleshoot issues with RF systems:
Work on DirecTV or DISH Systems? In addition to mapping, the Coax Genius will indicate when there is DC voltage present and the exact voltage present. It can also determine if the path from the Remote to the Receiver passes DC voltage.
- Genius Scan is the ultimate cable mapper. Simply connect the Remotes to the locations you want to map and the Receiver can find them at any point on the same RF system.
- Genius Tone operates similar to a conventional Toner Tracker, except Genius Tone is designed specifically for coaxial cable. Genius Tone uses a different signal type that is designed to go through splitters, taps, amplifiers and just about any RF component. Mapping cable through an RF system is effortless with Genius Tone.
- Genius Volt makes detecting and troubleshooting issues caused by AC or DC voltages on RF systems so much easier. Simply connect the Coax Genius, and it will immediately show you the exact AC or DC voltages that are present on the system.
The Coax Genius 1X4 Kit Includes:
1x Coax Genius Receiver
4x Coax Genius Remotes (ID#1-4)
1x Rexford Tools 4-Port USB Charger
4x Cloth Mini USB Charging Cables
2x 20dB Attenuators
5x F-81 Adapters (Pre-Installed)
1x Quick Reference Card
1x Quickstart Guide
1x Operation Manual
1x Custom Carrying Case
Maps up to eight locations through splitters, taps, and virtually all other RF components. (This kit includes four Remotes and maps four locations at a time)
Drastically reduces the time technicians spend on job sites mapping RF systems.
Offers a one button operation that is simple to use and requires no training.
Bi-Directional technology eliminates headaches by avoiding false positives.
Simplifies mapping large MDU systems regardless of size and number of installed RF components.
Simplifies locating and troubleshooting problematic drops.
Aides in troubleshooting digital signal issues caused by the presence of AC voltage.
Allows technicians to easily check for DC voltage (Measures Up to 100VDC).
Checks if path from the Remotes to the Receiver passes DC voltage.
Receiver and Remotes are rechargeable via any 5V USB power source.
Extraordinary Runtimes: Single Charge Runs the Receiver for 14 Hours & the Remote for 24 Hours!
Remotes and Receiver are Constructed with Aluminum Housings.
Male F Connector on Remotes and Receiver Allows for F-81 to be Replaced.
Includes One Year Limited Warranty.
Coax Genius Specifications Sheet
Coax Genius Operation Manual
PLEASE NOTE: THE COAX GENIUS DOES NOT PROTECT AGAINST SHOCK FROM HIGH AC VOLTAGES!