Home > Categories > Cable Prep & Termination > Cable Mappers and Toners >

Network Wire Toner Tracker & Tester w/ Rugged Leads

Network Wire Toner Tracker & Tester w/ Rugged Leads



 
Alternative Views:


TTS PRICE: $54.99

STATUS: ON ORDER



Availability:
Normally Ships Same Day

PRODUCT CODE: RMT-NF-889
QUANTITY:

PRODUCT DESCRIPTION
 

If you install or service any system that uses CAT5e/6/7 wiring, you are going to LOVE this toner tracker. In addition to the common RJ11 and alligator clips, the NF-889 has a built in RJ45 jack. No more adapters or cutting off the connector and stripping your wire, just plug it in!

The Tracker Wand is loaded with features as well. In addition to a volume controlled audible beep, the NF-889 has a red LED that also indicates when you've located your wire; perfect for loud work environments! If you are in an office and do not want to disturb your customers, plug in the included ear buds into the headphone jack. If you are working in a dark workspace, you can take advantage of the NF-889's built in LED flashlight. We've saved the best for last; once you've found your CAT5/6/7 cable, plug the RJ45 plug into the bottom of the Tracker Wand and the NF-889 will verify the cable's wiring is correct! 8 LED indicators confirm continuity quickly and easily.

The NF-889 is also great for other wires and cables. Alarm wire, speaker wire, coaxial cable, irrigation wire, invisible fencing, and many many more. With a single conductor and a good ground, you can follow an uncharted wire virtually anywhere!

Specifications:
  • Working Current: <=10mA(Emitter), <=30mA(Receiver)
  • Signal Transmission Form: Multi-Frequency Impulse
  • Signal Output Electric Status: 8Vp-p
  • Distance of Signal Transmission: >=3km
  • Volume Regulate Function: Yes
  • Earphone Option: Yes
  • Sensitive: Induction Distance Less than 20mm, Strong Anti-Jamming Ability
  • Storage Temperature: -20°C to 50°C
  • Operation Temperature: -10°C to 40°C
  • Battery: DC 9V Alkaline Battery
  • Battery Life Time: >50hrs Continuous Use
  • Dimensions: 126*49*34mm(Toner), 175*42*27mm(Tracker)

  • Kit Includes:
  • 1x Toner
  • 1x Tracker Wand
  • 1x RJ45 Cable
  • 2x Crocodile Clamps (Alligator Clips)
  • 1x Earphone
  • 1x Instruction manual
  • 1x Carrying Pouch

    Average Customer Review: Average Customer Review: 4.5 of 5 4.5 of 5 Total Reviews: 3 WRITE A REVIEW

      So far, this Product Review was helpful to 0 TTS Customers.
     
    4 of 5 Just Works good August 13, 2019
    Reviewer: Dean Williams from Fort Gibson, OK United States  
    This is just what i needed for around the house..

    Was this review helpful to you?

      So far, this Product Review was helpful to 0 TTS Customers.
     
    5 of 5 The Toner June 25, 2019
    Reviewer: Mark Witmer from Havelock, NC United States  
    This works great and can tone from one end of the building to the other side!

    Was this review helpful to you?

      So far, this Product Review was helpful to 0 TTS Customers.
     
    5 of 5 Network Wire Toner Tracker & Tester w/ Rugged Lead March 21, 2018
    Reviewer: Jennifer Pope from Cincinnati, OH United States  
    Have never really needed (but always wanted) this tool until now.  Worked great.  You don't need to purchase an expensive tool to get the job done.  Very happy

    Was this review helpful to you?


    Browse for more products in the same category as this item:

    Categories > Cable Prep & Termination > Cable Mappers and Toners
    Categories > Test & Measurement > Cable Mappers and Toners
    Categories > Test & Measurement > Cable Mappers and Toners > Toners & Probe Kits
    Categories > Test & Measurement > Toners & Probe Kits
    Categories > Cable Prep & Termination
    Categories > Test & Measurement
    Categories