Byte Brothers Inline Power Panel with Probe

Home > Categories > Test & Measurement >

TTS PRICE: $233.99

STATUS:

IN STOCK

Availability:

Normally Ships Same Day

PRODUCT CODE: BBR-POE1000ILT

QUANTITY:

PRODUCT DESCRIPTION

Introducing the Byte Brothers Power Panel Tone Star - Model POE1000ILT. CAT5/6 cables are jammed with data, phone, surveillance cameras and now 48 volts of PoE (Power over Ethernet)...the Power Panel Cat5/6 DVM spots these devices. And, two interactive buttons exercise both LAN switches and the Power over Ethernet (PoE) ports. Plus, the inline version allows connecting between 2 devices, passing the PoE power through to the VoIP phone or camera and measuring power (in watts). All Power Panels come with a port beacon feature and tone generator to help locate ports and wires. The POE1000ILT includes a feature-rich, filtered probe. If you are an installer of VoIP phones or IP cameras, the Power Panel will soon become your favorite tool.

Power Panel Features:

Model: POE1000ILT Power Panel Tone Star

Locate network ports by turning on the port beacon feature

Locate active network devices and display capabilities - includes VoIP phones, IP cameras, access points, switches, NIC cards. The Standard Unit displays the advertised speed (10/100/000) and duplex. Location on cable is also displayed. If you also wish to display the negotiated speed between two devices order the POE1000IL (or ILT) below. Negotiated speed is possible because these models can be connected "inline" between two devices.

Locate phones, FAXs, modems, PBXs - Voltage and location on cable are displayed

Locate Power over Ethernet (endspan and midspan) - Voltage and location on cable are displayed (includes both discovery voltage and full voltage)

Simulate a PoE device - Press the "Test PoE" button to simulate a VoIP phone, IP camera or other PoE device connection

Tone and trace cables - Locate cable runs by placing a tone on one end of the cable with the Main Unit and detecting the tone on the far side with a tone probe (not included). The tone generated is compatible with most probes. (For a Power Panel with a Probe included see the POE1000ILT)

Power pass thru - The two jack design of the inline unit allows the tester to be connected in between (inline) the two devices. This allows the PoE power to be passed to the PoE device so it can powered while the line is tested.

Measure PoE device power draw - Connect the Main Unit inline between the device and the power source (switch) and measure the power draw of the device (in watts). Too much power draw is the number one reason for IP/PoE network failure

Probe Features:

High end probe with ultrabright LED lighted tip to see in dark closets

Special filtered circuitry for elimination of fluorescent hum

Safety LED indicates "60HZ present"

"Tone present" LED lights to aid in noisy environments

Insulated tip stops accidental shorts when probing punchdown blocks

Kit Includes:

POE1000ILT, Probe, Auto shutoff, (2) 9V batteries, and pouch

Note: The Tone Star Power Panel is also an inline version with two jacks so it can go in between two devices to power the device and measure the device's power draw (in watts).

Like this product? Share your thoughts with our other customers! Be the first to write a review

Browse for more products in the same category as this item:

Categories > Test & Measurement
Categories > Test & Measurement > Networking
Categories