Home > Categories > Test & Measurement >

Platinum Tools VDV MapMaster 3.0 Cable Tester

Platinum Tools VDV MapMaster 3.0 Cable Tester



 
Alternative Views:


TTS PRICE: $142.85


STATUS:  IN STOCK



Availability:
Normally Ships Same Day

PRODUCT CODE: PLA-T130
QUANTITY:

PRODUCT DESCRIPTION
 

The VDV MapMaster 3.0 from Platinum Tools combines continuity testing, mapping, generating tones and length measurement functions into a single easy-to-use unit for installation, troubleshooting, and maintenance for telco, network, or coax cable. The backlit display, glow-in-the-dark keypad and a built-in flashlight helps you to work in the dark.

Whether your jobs are commercial or residential, the versatility and added features of the VDV MapMaster 3.0 makes it a best value cable verifier for the professional installer!

Features:
  • Detects Open, Shorts, Miswires, Reverses & Split Pairs
  • Tests to T568A/B wiremap configuration: shorts, opens, miswires,reverses and split pairs
  • Single-ended testing for shorts & split pairs
  • Measures length in feet/meters
  • Identifies cable location on active ports using flashing Port Link Light
  • Easy to read, backlit LCD screen with large icons, glow-in-the-dark keypad and built-in LED flashlight for use in dark areas
  • Verifies continuity for multiple cable types (LAN, Phone and Video)
  • Audible beep for additional feedback
  • Identify up to 20 network or coax cable runs at a time
  • Measures cable length, distance to opens and breaks specific wires, pairs or all wires simultaneously
  • Master remote stored in main unit
  • Voltage detection warning icon
  • Continuous loop test mode for trouble shooting
  • Auto-off and timed backlight in any mode for low power consumption and long battery life
  • Audible Tone Generator, 4 selectable cadences

  • Specifications:
  • Display: Large 2.75” Backlit Monochrome LCD
  • Maximum Voltage: between any two connector pins without damage RJ12/RJ45/F: 50V DC or AC
  • Battery Life: 9V alkaline battery typical: Standby: 4 years / Active: 425 hours
  • Cable Types: Shielded or Unshielded; CAT7, CAT6A, CAT5e, CAT5, CAT4, CAT3, Coax
  • Maximum RJ Cable Length Testing: 0 to 1,000 feet (305 meters)
  • Minimum Cable Length for Split Pair Detection: 1.5 feet (0.5 meters)
  • Maximum Coax Cable Length: Varies depending on cable resistance varies
  • Low Battery Icon: flashes when battery voltage falls below 6V
  • Measurement Technology: Capacitance testing
  • Length Accuracy Without Length Constant: +/- 3% plus + 1 foot
  • Default Length Constant (Restored with power on reset): Voice (Twisted pair): 17.4 pF/ft / Video (Coax): 16.5 pF/ft
  • Data (Twisted pair): 15 pF/ft
  • Warranty: Limited 1 yr
  • Humidity: 10% to 90%, non-condensing
  • Operating Temperature: 0˚C/32˚F to 50˚C/122˚F
  • Storage Temperature: -20˚/-4˚F to 60˚C/140˚F
  • Dimensions: 6.8” x 3.2” x 1.4” (17.3 x 8.1 x 3.5 cm)
  • Weight: 10.8 oz. (305 grams) with battery and remote

  • Platinum Tools Cable & Network Test Comparison Chart
    Platinum Tools T130 Instructions

    Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 1 WRITE A REVIEW

      So far, this Product Review was helpful to 0 TTS Customers.
     
    5 of 5 Cable October 16, 2019
    Reviewer: Eric Doucette RCDD from Beaverton, ON Canada  
    Works great for length and pin our

    Was this review helpful to you?


    Browse for more products in the same category as this item:

    Categories > Test & Measurement
    Categories > Test & Measurement > Cable Mappers and Toners
    Categories > Test & Measurement > Cable Mappers and Toners > 20-Way Mappers
    Categories > Test & Measurement > Networking
    Categories > Test & Measurement > Other
    $125 to Spend
    Categories