Home > Categories > CAT/UTP Prep & Termination > Crimpers (UTP) >

802 Piece Insulated Ferrule Kit w/ Crimper

802 Piece Insulated Ferrule Kit w/ Crimper

Alternative Views:

TTS PRICE: $59.99
Sale Price: $49.99


Normally Ships Same Day



If you work with lots of various sizes of wires, this is the kit for you! It comes with 800 insulated ferrules for wire sizes from 24AWG-7AWG, the crimper, and a rugged organizer.

If you work with alarm systems, access control, power supplies, A/V, HVAC, or any other industry that requires you to put a stranded wire into a terminal block, these ferrules will be your new best friend. For whatever reason, ferrules seem to have completely passed over our industry. Most of the customers we ask have never heard about these glorious little buggers and how they simplify your installs. So now we are on a mission to get them into all our customers hands!

Unless it is your first day on the job, chances are you've experienced hours of troubleshooting an issue that was caused by a single copper braid crossing into the wrong position on your terminal block. If you are really serious, you may even be tinning your wires with a soldering iron to avoid this exact thing. Another frustrating issue many experience is the entire wire coming out of the terminal blocks.

Ferrules eliminate the above two issues by containing the braid, and giving the terminal block something substantial to grip when tightening the screw down. The surrounding jacket on the ferrule is thin, so it barely changes the size of your wire. If saving you time and frustration wasn't enough, they also make your installs look sharp! The little plastic collar butts perfectly up to the terminal block giving a consistent and professional looking job!

  • Tames Stranded Wire Connection Points
  • Helps Prevent Solid Wires from Snapping
  • Eliminates Over-tightening and Under-tightening Issues
  • Give your Terminations a Clean Professional Look
  • Eliminates Potential Shorts

  • Kit Includes:
  • RTC-864 Ferrule Crimper
  • 100pc Insulated 22-24AWG Wire Ferrule - 100pc Bag - White
  • 100pc Insulated 20AWG Wire Ferrule - 100pc Bag - Blue
  • 100pc Insulated 18AWG Wire Ferrule - 100pc Bag - Red
  • 100pc Insulated 16AWG Wire Ferrule - 100pc Bag - Black
  • 100pc Insulated 14AWG Wire Ferrule - 100pc Bag - Blue
  • 100pc Insulated 12AWG Wire Ferrule - 100pc Bag - Orange
  • 100pc Insulated 10AWG Wire Ferrule - 100pc Bag - Green
  • 100pc Insulated 7AWG Wire Ferrule - 100pc Bag - Black
  • Rugged Eclipse ECL-SB-2419 Part Organizer

  • Please Note: The Crimper does not fit inside the connector case

    Average Customer Review: Average Customer Review: 4.5 of 5 4.5 of 5 Total Reviews: 21 WRITE A REVIEW

      So far, this Product Review was helpful to 0 TTS Customers.
    3 of 5 Ferrell's & Crimp Tool May 14, 2021
    Reviewer: Gary Scoville from Torrington, CT United States  
    I found the ferrell's to be about average quality and the crimping tool to be rather cheep. It does get the job done but I found that they come off under curtain conditions. I would rate them just adequate!

    Was this review helpful to you?

      So far, this Product Review was helpful to 0 TTS Customers.
    4 of 5 Stranded wire cleanup February 5, 2021
    Reviewer: Randall Quinton from SAMMAMISH, WA United States  
    The crimper was very easy and consistent to use.
    Bundling the wire strands with a collar does come with a price. A tight fit now may not work with the additional metal collar and squaring of the wire.

    The colored collar has a larger diameter than the wire and should be taken into account when using tightly spaced push-in connectors.  A 3.5mm spaced push-in connector is too tight to use the 16AWG(RTC-TPIN) or 18 AWG (RTC-001) crimp. The 20AWG(RTC-P75) just fits but the 22/24AWG(RTC-P50) works well. The good news is that a 20AWG wire will fit in the RTC-P50 crimp.

    The wire 'grab' with the collar is great. It feels very solid and pull resistant. Perfect for speaker wire.

    Was this review helpful to you?

      So far, this Product Review was helpful to 0 TTS Customers.
    5 of 5 What I needed, without the extra cost September 29, 2020
    Reviewer: Andrew  
    Work for an ISP/Fixed wireless provider. This allows me to terminate stranded wire for ease of install on the tower and keep the cabinets looking clean at the base.

    Was this review helpful to you?

      So far, this Product Review was helpful to 0 TTS Customers.
    4 of 5 wire crimp set May 20, 2020
    Reviewer: mitch the tech from Prineville, OR United States  
    Nice concept works well but
    Case will not hold the crimp-er
    Case is kind of cheap - not made for the set - universal
    sleeves are not labeled by wire size - trial and error
    If you run out of sleeves ordering will be an issue
    Sleeves are colored but not with a decoder
    The crimp sleeve is not attached to the insulator except by friction

    Was this review helpful to you?

      So far, this Product Review was helpful to 0 TTS Customers.
    5 of 5 Excellent Tool May 18, 2020
    Reviewer: Delmar Fadden from Preston, WA United States  
    Clever well designed tool to eliminate stray wire concerns with stranded wire and to give small gauge wires a more substantial ending.  Very nice tool.

    Was this review helpful to you?

    View All Customer Reviews

    Browse for more products in the same category as this item:

    Categories > CAT/UTP Prep & Termination > Crimpers (UTP)
    Categories > Connectors & Adapters > Ferrules
    Categories > Connectors & Adapters
    Categories > Hand Tools > Crimpers
    Categories > Hand Tools > Crimpers > Terminal Crimpers
    Categories > Hand Tools
    Categories > CAT/UTP Prep & Termination