Belden CPLCRBC-BR Double Bubble Compression Tool for F, BNC, RCA

Home > Categories > Cable Prep & Termination > Compression Tools > Double Bubble >

Belden CPLCRBC-BR Double Bubble Compression Tool

TTS PRICE: $247.99

STATUS:

IN STOCK

Availability:

Normally Ships Same Day

PRODUCT CODE: LCRBC-B

QUANTITY:

PRODUCT DESCRIPTION

Belden's Double Bubble system exists for the installations that fail everywhere else: security cameras, rooftop runs, and exposed wiring where moisture and weather kill ordinary terminations.
The connectors create two independent 360-degree compression points — one exterior, one interior — and the CPLCRBC-BR is the tool that makes them. The result is a permanently sealed connection with superior protection against moisture migration and signal ingress/egress.

The tool itself is built to match the claim: manufactured from 4100-series aircraft-grade chromoly alloy for maximum strength, with a self-adjusting plunger head that delivers precise, consistent compression on every squeeze — no calibration, no adjustments, no drift over thousands of cycles.
The compression dies are built into the tool body, which is what allows Double Bubble connectors to skip the separate compression sleeve entirely.

Compatibility covers the full F-Conn Double Bubble family — RG59/RG6 F, BNC, and RCA connectors — plus F-Conn RG59/RG6 Series basic compression connectors.
A silver interchangeable adapter tip is included for compressing nickel F and nickel RCA connectors, ready to use out of the box. Made in the USA with a 1-year warranty.

Features:

Creates two 360-degree compression points for a permanently sealed Double Bubble connection
Compresses all F-Conn Double Bubble RG59/RG6 F, BNC, and RCA connectors
Also compresses F-Conn RG59/RG6 Series basic compression connectors
4100-series aircraft-grade chromoly alloy construction
Self-adjusting plunger head — consistent compression with no recalibration
Includes silver adapter tip for nickel F and nickel RCA connectors; no adjustments needed
Ideal for security cameras, CCTV, satellite, and exposed outdoor wiring
Made in USA; 1-year warranty

Specifications:

Model: Belden CPLCRBC-BR
Connector Types: Double Bubble F, BNC, RCA; F-Conn basic RG59/RG6
Cable Types: RG59, RG6
Construction: 4100-series aircraft-grade chromoly alloy
Included: Silver adapter tip (nickel F / nickel RCA)
Origin / Warranty: Made in USA / 1 year
UPC: 845671000412

Average Customer Review: Average Customer Review: 4.5 of 5

4.5 of 5 Total Reviews: 5 WRITE A REVIEW

So far, this Product Review was helpful to 0 TTS Customers.

Computer/Video Installer	December 27, 2022
Reviewer: Ken Parkin from knoxville, TN United States

Pricey, but well worth the money... Creates a clean crimp EVERY time! Zero failures, and that's important.

Was this review helpful to you?

So far, this Product Review was helpful to 0 TTS Customers.

No problems	August 24, 2022
Reviewer: Chris from Banning ca.

It works great with bnc compression connectors. Used many different brands and they were all junk. This is the only one i found that works properly and continues to work.

Was this review helpful to you?

So far, this Product Review was helpful to 0 TTS Customers.

Easy to use and solid connection	April 21, 2021
Reviewer: Patrick K. from WA United States

The manufacturer shows that the connection made using the Belden connectors (1694ABHD1) and Belden cables (1694A) takes 100 lbs of force to break. I can say the connection is solid. Definitely worth the money to provide peace of mind. Make sure you remove the adapter before connecting the Belden BNC connectors.

Was this review helpful to you?

So far, this Product Review was helpful to 0 TTS Customers.

Hints for last reviewer	February 12, 2019
Reviewer: Jerry Frank from Reading, MI United States

I've used this tool for some time now. While it's not my favorite crimper, it isn’t all that difficult to use. You don’t need to open the jaws manually. With the connector on the end of the wire simply insert it in the center of the jaws and push. The jaws will slide open and the cable/connector will slide through to the plunger. I agree with you about the adaptor being able to fall out of the tool when it is laid down or bumped. I’ve found, if I remove the adaptor, take a pair of small pliers and squeeze the retainer ears gently to bring them a little closer together the adaptor will stay in place. It may take a couple of tries to get the tension right on the ears. Hope this helps.

Was this review helpful to you?

So far, this Product Review was helpful to 0 TTS Customers.

Does the job, but difficult to handle	December 21, 2018
Reviewer: Jonathan Wiltshire from West Sacramento, CA United States

It takes two hands to open the jaws and place the fitting in place. The die which is used for coax fittings is removable, and may be dislodged and lost
It is a cumbersome item, if you have need to work close, it will not work well

Was this review helpful to you?

Browse for more products in the same category as this item:

Categories > Cable Prep & Termination > Compression Tools > Double Bubble
Categories > Hand Tools > Crimpers > Other Crimpers
Categories > Cable Prep & Termination > Compression Tools
Categories > Hand Tools > Crimpers

	Vanco Quickport F-Type, Gold Plated, White $2.39
	Klein Tools 5-Pocket Canvas Tool Pouch $48.00
	Klein Tools Pump Pliers - 10in $26.99
	Jonard Fiber Prep Kit with FCC and VFL + $674.95
	MegaPro Pozi Bit 1-2 Nickel Plated $5.79
	Channell Can Wrench with Type LG Slam Lock Key $39.99