(Your shopping cart is empty)

Shopper Award

Official PayPal Seal

  Home > Test Equipment >

Byte Brothers Inline Cable & Power Test Kit

Byte Brothers Inline Cable & Power Test Kit

Alternative Views:

TTS PRICE: $433.99


Normally Ships Same Day



ID Tag Text:

Dog Tag Color

ID Tag Color:


Introducing the Byte Brothers Cable and Power Kit - CPK1000IL. The only kit that handles both the cables and power! It combines the Real World Certifier digital cable tester with a Double Jack "Inline" Power Panel Cat5/6 DVM. This kit gives you the high performance Real World Certifier (with 250 report storage) and the Power Panel Cat5/6 DVM at a terrific savings. It has everything you need to thoroughly test cables and devices plus determine exactly what is on your Cat5/6 cable. And, if you work with PoE, you can test for voltage and test the operation of your PoE voltage source. The CPK1000 Kit contains both the RWC1000K and POE1000IL.

Byte Brothers Power Panel - Model POE1000IL. CAT5/6 cables are jammed with data, phone, surveillance cameras and now 48 volts of PoE (Power over Ethernet)...the Power Panel Cat5/6 DVM spots these devices. And, two interactive buttons exercise both LAN switches and the Power over Ethernet (PoE) ports. All Power Panels come with a port beacon feature and tone generator to help locate ports and wires. If you are an installer of VoIP phones or IP cameras, the Power Panel will soon become your favorite tool.

  • Model: POE1000IL Inline Power Panel
  • Locate network ports by turning on the port beacon feature
  • Locate active network devices and display capabilities - includes VoIP phones, IP cameras, access points, switches, NIC cards. The Standard Unit displays the advertised speed (10/100/000) and duplex. Location on cable is also displayed. Displays the negotiated speed between two devices. Negotiated speed is possible because these models can be connected "inline" between two devices.
  • Locate phones, FAXs, modems, PBXs - Voltage and location on cable are displayed
  • Locate Power over Ethernet (endspan and midspan) - Voltage and location on cable are displayed (includes both discovery voltage and full voltage)
  • Simulate a PoE device - Press the "Test PoE" button to simulate a VoIP phone, IP camera or other PoE device connection
  • Tone and trace cables - Locate cable runs by placing a tone on one end of the cable with the Main Unit and detecting the tone on the far side with a tone probe (not included). The tone generated is compatible with most probes.
  • Power pass thru - The two jack design of the inline unit allows the tester to be connected in between (inline) the two devices. This allows the PoE power to be passed to the PoE device so it can powered while the line is tested.
  • Measure PoE device power draw - Connect the Main Unit inline between the device and the power source (switch) and measure the power draw of the device (in watts). Too much power draw is the number one reason for IP/PoE network failure
  • Includes: POE1000IL, Auto shutoff, and 9V battery

  • Note: The inline version has two jacks so it can go in between two devices and power the device and measure power draw (in watts).

  • Byte Brothers Real World Certifier - RWC1000K. Can't afford a $5000 certifier but want a more professional test than you are performing now? Byte Brothers has the answer. In addition to the normal distance, opens, shorts, distance to fault and wire map - the Real World Certifier (RWC) performs sophisticated timing, crosstalk and cable construction tests to display cable category (Cat 5E, CAT6, etc.), propagation delay and skew. This greatly improves your installation skills because the RWC spots slightly undercrimped connections, cable coiled in the wall and other maladies that affect cable performance. Plus, you can store up to 250 test results in the RWC's flash memory for later printing using standard Excel spreadsheets. These can be emailed or given to your customer as proof of test. And, if you wish to test hubs, switches and NIC cards, the RWC displays the device's signal level(s) and device type (10,100,1000MB/s, half and full duplex). This is useful in determining signal strength at the end of a long cable run. Includes the main unit, a toner probe, carrying case and 1 hour instructional DVD. Compatible with all network devices.

    Test CAT5/6 Cables (UTP):
  • Shorts, distance to short
  • Opens, distance to open
  • Cable length (in feet)
  • Wiremap (IEEE 802.3 pairs)
  • Split pairs
  • Crosstalk (NEXT/FEXT) digitally on a PASS/FAIL basis
  • Propagation delay and skew per pair
  • Cable Category bar graph (CAT3 thru CAT 6) - The most popular test performed by the RWC determines cable category by digitally pulsing the cable and analyzing the cable parameters that affect speed. The RWC differs from the EIA/TIA standard because it tests with digital pulses, not sinewaves, yet the RWC results are accurate and greatly improve cable installation practices.
  • Speed - Bar graph shows predicted cable speed (10M, 100M, 1000M)

  • Test Coax Cables:
  • Short, distance to fault
  • Open, distance to fault
  • Cable length (in feet)

  • Test Network Devices:
  • The RWC displays link speed, duplex and data levels of network gear. Data level is displayed via a bar chart with the IEEE minimum voltage shown.
  • Determine speed and duplex ("advertised" speed)
  • Connect inline and determine speed and duplex of two devices ("negotiated" speed)
  • Test port data level (to meet minimum IEEE standards)

  • Cable and Port Locator:
  • The RWC displays link speed, duplex and data levels of network gear. Data level is displayed via a bar chart with the IEEE minimum voltage shown.
  • Locate both UTP and coax cable with tone. The Main Unit applies the tone and the probe detects it.
  • Locate connected ports with the port beacon feature. The Main Unit pulses the connected port and blinks the port's LED.

  • Store and Print Test Results:
  • 250 Reports - Store up to 250 test results in the RWC's flash memory for late transfer to your PC's Excel spreadsheet program
  • Email or print reports - Because the report is Excel, it can be easily emailed to your customer or printing is always an option
  • Automatically named - Reports are named sequentially 1-250 but you can add up to 16 characters of a custom naming per test
  • Combined report - The RWC can combine cable test data with network device testing data into a single report. In other words, results of a cable test can be combined with the test results from a network device using the same cable.

  • Includes:
  • Main Unit and Probe; 2 patch cables; data transfer cable and software; "Passed" stickers; 1 hour DVD showing the RWC in action; zippered, embroidered pouch; instruction manual; and 9V batteries (2)
    Average Customer Review: 5 of 5 Total Reviews: 2 WRITE A REVIEW

      So far, this Product Review was helpful to 0 TTS Customers.
    Great on line experence May 30, 2017
    Reviewer: Walter Davidson from Houston, TX United States  
    easy to order, they kept me informed on shipping, Arrived when needed Great Company

    Was this review helpful to you?

      So far, this Product Review was helpful to 0 TTS Customers.
    Technicians Tool April 11, 2016
    Reviewer: Larry from Minneapolis, MN United States  
    We were looking for an easy way to test Ethernet cables for connectivity. This is a great tool for that purpose.

    Was this review helpful to you?

    Browse for more products in the same category as this item:

    Test Equipment
    Test Equipment > Networking

    Company Info | Domestic Shipping Policies | Canadian Shipping Policies | Secure Shopping | Returns & Exchanges
    Product Index | Category Index | Help | Terms of Use

    Copyright © Tech Tool Supply, LLC. All Rights Reserved.
    Built with Volusion
    Blank Gradient Login Logoff New Customer BG New Customer My Account Wholesale BG Wish List Wholesale