Home > Categories > Cable Prep & Termination > Cable Mappers and Toners >

Fluke Networks PRO3000F60 Tone & Probe Kit w/ 60HZ Filter

Fluke Networks PRO3000F60 Tone & Probe w/ 60HZ Filter



 
Alternative Views:


TTS PRICE: $144.69

STATUS: ON ORDER


Availability:
Normally Ships Same Day

PRODUCT CODE: FLK-4962074
QUANTITY:

PRODUCT DESCRIPTION
 

The Pro3000 Tone and Probe Series provides clear and precise tracing of communication cabling. The innovative filtered probe obstructs signal interference present in the environment (caused by power cables and lighting) when listening for tone. The probe’s powerful speaker makes tracing cables through drywall, wood or other enclosures quick and easy.

The Pro3000 toner’s patented SmartTone technology (with five different tones for exact pair identification) allows the technician to identify individual pairs. The tone generator is also capable of sending tone up to 10 miles (16 kilometers) on most cables! The angled-bed-of-nails clips allow easy access to individual wires, and the RJ-11 connector is ideal for use on telephone jacks. Attach the nylon pouch to your belt, and you will be equipped for any wire identification job.

Signal Interference from sources in the environment can make tracing cable a frustrating process. The Pro3000F Filter probe “Stops the Buzz” by obstructing these signals allowing you to hear the tone you are tracing loud and clear. The Pro3000F60 which filters out 60 Hz interference which is the standard frequency in North America.

Features:
  • SmartTone technology
  • Send tone signal up to 10 miles on most cables
  • Line cord features angled bed-of-nails clips and ruggedized RJ-11 plug for direct access to phone and data jacks without adapters
  • External switch allows selection of solid or alternating tone options, indi­cated with solid or flashing LEDs
  • Continuity testing
  • Line polarity confirmation
  • Loud large speaker amplifies tone through walls, enclosure, wood or plaster
  • Easy-to-use adjustable volume control dial
  • “Quick-twist” tip for easy replacement
  • Free spare tip inside Pro3000 Tone and Probe Kit

  • Pro3000 Analog Toner Specifications:
  • User interface:
    • Slide switch selects Continuity or Tone Mode
    • Push button switch selects SOLID, ALT or OFF
    • Tone mode LED
    • Continuity/Polarity LED
  • Solid Frequency: 1000 Hz nominal
  • Alternating Frequency: 1000/1500 Hz nominal
  • Over Voltage Protection: 60 Vdc in Toner/Polarity Mode
  • Output Power in Tone Mode: 8 dbm into 600 ohms
  • Output Voltage Level in Continuity Mode: 8 Vdc with fresh battery
  • Battery: 9V alkaline
  • Temperature: Operating: -20 C to 60 C, Storage: -40 C to 70 C
  • Case dimensions: 2.7 in. x 2.4 in. x 1.4 in. (6.9 cm x 6.1 cm x 3.6 cm)

  • Pro3000 Analog Probe Specifications:
  • User interface:
    • ON/OFF push button
    • Volume dial
    • Replaceable tip
    • 3.5 mm earphone jack
  • Battery: 9V alkaline
  • Temperature: Operating: -20 C to 60 C, Storage: -40 C to 70 C
  • Case dimensions: 9.8 in. x 1.6 in. x 1.3 in. (24.9 cm x 4.1 cm x 3.3 cm)

  • Kit Includes:
  • 1 - Pro3000 F60 Probe
  • 1 - Pro3000 Analog Toner
  • 1 - Carrying Pouch with Belt Loop

    Like this product? Share your thoughts with our other customers! Be the first to write a review

    Browse for more products in the same category as this item:

    Categories > Cable Prep & Termination > Cable Mappers and Toners
    Categories > Test & Measurement > Cable Mappers and Toners
    Categories > Test & Measurement > Cable Mappers and Toners > Toners & Probe Kits
    Categories > Test & Measurement > Toners & Probe Kits
    Categories > Cable Prep & Termination
    Categories > Test & Measurement
    Categories