Home > Categories > Safety & Outdoor Gear > Positioning Belts >

Klein Full Floating Body Belt - 28in

Klein Full Floating Body Belt - 28in



 
Alternative Views:


TTS PRICE: $299.38


STATUS:  IN STOCK


Availability:
Normally Ships Same Day

PRODUCT CODE: KLN-5278N-28D
QUANTITY:

PRODUCT DESCRIPTION
 

Klein Tools 5278N-28D Full Floating Body Belt features a Latigo-leather belt pad that is laced and stitched with two pocket tabs. A rolled-edge leather belt cushion provides comfort when leaning back. A 1-3/4-Inch (4.4 cm) wide Klein-Kordģ belt strap covered with top-grain harness leather ensures long-lasting use.

Features:
  • Meets or exceeds all OSHA regulations, which apply to positioning device systems, for power utilities (OSHA 1926.959) and telecommunications (OSHA 1910.268)
  • Meets or exceeds standards ASTM F887 and CSA Z259.1
  • Belt has a permanent tag, which identifies model number, serial number, size, and date of manufacture
  • Latigo-leather belt pad with two laced and stitched pocket tabs
  • Rolled-edge leather belt cushion for comfort when leaning back
  • Padded for maximum comfort and body fit
  • 1-3/4-Inch (4.4 cm) wide Klein-Kordģ belt strap covered with top-grain harness leather for long-lasting use
  • Full-floating D-ring web strap with straight double-bar D-rings
  • Forged circle D-rings have corrosion-resistant finish and are proof-loaded to meet OSHA regulations
  • Four suspender rings
  • Tape thong
  • Glove-bag ring
  • Two-way knife snap
  • Long-lasting 1-1/2'' (38 mm) wide double-riveted leather tool loops

  • Specifications:
  • Waist Size: 53'' to 45'' (134.6 to 114.3 cm)
  • Special Features: Rolled-Edge Leather Belt Cushion, Padded, Suspender Rings
  • Material: Leather, Nylon, Klein-Kord with Alloy Steel Hardware
  • Color: Natural
  • Closure Type: Forged Single Tongue Buckle
  • Number of Anchor Points: 2
  • Standard: OSHA
  • Overall Width: 5'' (1.3 cm)
  • Weight: 5.13 lb (2.3 kg)

  • NOTE: Never order Klein linemanís body belts by waist size. Order by the desired distance between the D-rings +2in. Size your body belt using a tape measure. To obtain the correct D-to-D size, measure around the back from hipbone to hipbone and then add 2" (51mm). The D-rings should be located about 1" (25mm) in front of the hip bones.


    Like this product? Share your thoughts with our other customers! Be the first to write a review

    Browse for more products in the same category as this item:

    Categories > Safety & Outdoor Gear > Positioning Belts
    Categories > Safety & Outdoor Gear > Climbing Equipment > Harnesses
    Categories > Safety & Outdoor Gear
    Categories > Safety & Outdoor Gear > Climbing Equipment
    Cable Installation > Safety Equipment
    Cable Installation
    Categories