 |
Klein NCVT-6 Non-Contact Voltage Tester with 66 ft Laser Distance Meter - 12 to 1000V AC
The Klein Tools NCVT-6 is a non-contact voltage tester (NCVT) with an integrated laser distance meter. It can detect voltage over the full-range from 12 to 1000 VAC and can measure distances from 2-Inch (51 mm) up to 66-Feet (20 m). The laser distance meter functions independently from the NCVT with a simple-to-use intuitive interface. Easy, single-button changes between voltage detection and laser distance measurements.
Features:
Provides non-contact determination of AC voltage in cables, cords, circuit breakers, switches, outlets and wires, as well as AC voltage in security, entertainment, communications, environmental control, and irrigation systems
Detects AC voltage from 12 to 1000V with visual and audible indicators
Incorporates a 66-Foot (20 m) Laser Distance Meter that can measure in meters, inches with decimals, inches with fractions, feet with decimals, or feet with fractions
Distance accuracy of +/- 1/16" from 2" to 32.8 ft, and +/- 1/8" beyond 32.8 ft up to 65.6 ft, under normal operating conditions
High-visibility reverse contrast display for better viewing in low light conditions
Laser Class II, 630 to 670nm, Max. Power <1mW
Simple-to-use intuitive interface; easy single-button changes between laser distance measurements and voltage detection
Delivers simultaneous visual and audible voltage indicators when AC voltage is detected
Audible voltage indicator beeps at a greater frequency the higher the voltage that is sensed, or the closer to the voltage source
Built to withstand a 6.6-Foot (2 m) drop
Auto Power-Off conserves and extends battery life
Screw-thread battery cap
Lightweight tool with pocket clip for easy everyday carrying and storage
CAT IV 1000V safety rating
Ingress Protection IP40 Dust Resistant
Includes:
1 x NCVT-6 tester
2 x Alkaline 1.5V AAA batteries
Specifications:
Type: Non-Contact Voltage Tester
Application: Non-Contact Detection and Testing of AC Voltage with Integrated Laser Distance Meter
Special Features: Laser Distance Measuring, Laser Pointer, Reverse Contrast LCD, LED and Audible Beep Indications, Auto-Power Off, Pocket Clip
Material: Plastic and Electronic Assemblies
Voltage: 12-1000V AC
Frequency: 50 - 500 Hz
Distance Range: 2" (51 mm) to 66' (20 m)
Accuracy: 1/16" from 2" to 32.8'; 1/8" from 32.8' to 65.6'
Drop Protection: 6.6' (2 m)
Pollution Degree: 2
Ingress Protection: IP40 Dust Resistant
Standard: CATIV 1000V, Laser: Class II, 630nm to 670nm, Max. Power <1mW
Batteries: 2 x AAA
Overall Length: 6.45" (16.4 cm)
Overall Height: 1.32" (3.4 cm)
Overall Width: 1.21" (3.1 cm)
Weight: 2.5 oz (71 g)
Model: NCVT-6
Related Products:
| Part # | Klein # | Description |
|---|
| KLN-NCVT-5A | NCVT-5A | Dual-range non-contact voltage tester with laser pointer, 12 to 1000V AC |
| KLN-NCVT2P | NCVT2P | Dual-range non-contact voltage tester, 12 to 1000V AC |
| KLN-NCVT-4IR | NCVT-4IR | Non-contact voltage tester with infrared thermometer, 12 to 1000V AC |
Instructions
|
|
|
Skip to content
Klein Tools NCVT-6 
