Have you ever wanted a tester that did the whole low voltage job? A tester that has super accurate cable testing plus testing APPS for many of the low voltage devices that you work everyday? Devices such as switches, PoE, CCTV and Dolby speaker installations? If you are one of those people, then The Low Voltage Pro (LVPro) is the tester family for you.
More and more cable installers are now doing "device" installations... installing IP phones, IP cameras, CCTV equipment. They are working with devices like switches, PoE power, and surround sound speakers. Cable testing is still a major part of the job but only one part of the larger job.
But that's not to say we have forgotten about bread and butter quality cable testing. All models of the LVPro include the basic CABLE TEST APP that includes TIA586 tests (opens, shorts, split pairs) plus ohms. Also, included with all LVPro models is the Length-RLQ APP, a comprehensive test package that includes length and "RLQ" (Return Loss Quality).
Features All Apps, Preloaded:
Cable Test Pack - Cable diagram, Pass/Fail, Delay, Skew, Ohms 1% HQ Length included with LVPro 2 and 3
Wall Jack ID - Locate multiple wall jacks for CAT5/6 and coax. Requires Remote kit(s)
Speaker 7.1 ID - Especially designed to properly map and label A/V speaker wires. Requires remote kit
Speaker Pop - Locate speakers by audibly popping them. Alligator clips included with all LVPRO Models.
Port Blink - Locate a cable connection to a switch port by blinking the switchs Link LED
Toner Locator - Place a tone on one end and detect it on the far end. Requires remote tone probe.
Alert LEDs - Two LEDs quickly alert you to an active switch connection or voltage on the line.
Length - Get perfect length, all wire types. Use built-in VOP values or calibrate with your cable. Adds length readout to Cable Test App (cable length, distance to open or short).
RLQ - Return Loss Quality tests for load mismatches that affect the wires power and data transfer capability.
Printing Results - Store for later printing up to 250 tests (all cable types). USB and software included
Battery Load - (test alarm system and other backup batteries by doing a loaded battery test)
CCTV Signal - CCTV systems require a minimum of 1Vpp to DVR. Measure and display Vpp of video signal.
Phone Volts - Detect central office telephone connections. Display voltage and cable location (up to 4 phones)
PoE Volts - Detect PoE voltage and display its amplitude and location on the cable (midspan, endspan or both))
10/100/1000 Detection/Display - Plug into any active port (computer, switch, VoIP, access point) and display its capabilities
LVPRO Remote Unit
10 RJ45 remotes (not "smart remotes")
10 Coax remotes (not "smart remotes")
2 Cat 6 patch cables
2 RJ45/alligator clips adapters
Upgrade/Printer/PC USB cable (6")
Protective case (zippered)
4 AA batteries
Illustrated users manual
1 year warranty
Designed and Made in the U.S.A.