HIGHER SHIPPING COST: Due to its length, this product exceeds standard carrier size limits and FedEx applies an oversize handling surcharge. The good news: the surcharge only applies to the first item, so additional units typically add very little to the shipping cost.

MacLean J6526WCA No-Wrench Screw Anchor - 6" Helix, 3/4" x 66" Rod

The No-Wrench Anchor from MacLean can be placed with power equipment or by hand. MPS No-Wrench Anchors are made of a forged eye anchor rod with a welded helix and angle-cut tip.

The J6526WCA anchor is ideal for use in medium dense to loose soils. The final installed height of the exposed anchor should be 8 to 12 inches above grade level. No-Wrench anchors are Hot Dip Galvanized per ASTM A123.

All No-Wrench Anchors have 3 Guy Attachments.

Use the Anchor Hat for easier installation!

NOTE: Installing procedures and embedment depth must be followed to assure the anchor load capacity.