Home > Categories > Drilling, Running & Fishing > Push Pull Rods (Glow Rods) >

3pc Oregon Thread-It Push-Pull Rod Kit - 12in 24in 36in

3pc Oregon Thread-It Push-Pull Rod Kit - 12in 24in 36in

TTS PRICE: $52.99


Normally Ships Same Day



CIFA# T20012 - 84973, T20024 - 84974, T20036 - 84975

Buy all three and save! This kit includes all three sizes of Oregon Thread-Its.

The Thread-iT is a sturdy and simple device that is capable of starting multiple types and sizes of wire or cable through walls, floors and ceilings with ease. It's a slender rod with a blunt probe end and a threaded wire connecting end. When attaching the wire to the tool, you don't need to strip the sheath from the wiring. Merely screw the tool into the end of the wire insulation.

The probe end of the Thread-iT will guide the tool through the wall, ceiling or flooring and insulation. By pushing the device through the wall, the attached wire follows and is also threaded through the wall.

Our staff here at Tech Tool Supply tried the Thread-It with RG6, RG59, CAT5, CAT6, 18/2, 24/4, 23AWG Mini Coax, and just about every wire and cable we could find in our warehouse. The Thread-It consistently worked perfectly with everything we tried!

  • Gets wire through old holes that are ragged or partially blocked
  • Easy to grip, and long enough for both hands
  • Doesn't require sheath stripping
  • Won't release the wire even with substantial tugging - it must be cut off or un-threaded
  • The screw end can be used to mark or start holes
  • Non-Conductive Construction
  • High-Visibility Powder Coating
  • Size: 12in / 24in / 36in

    Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 1 WRITE A REVIEW

      So far, this Product Review was helpful to 0 TTS Customers.
    5 of 5 Extremely Useful product January 30, 2018
    Reviewer: Bud C from Port Clinton , OH United States  
    If you have ever tried to fish a flexible cable through a wall with several layers, you know how frustrating it can be.  Even using a rod and taping the cable on is not the best because taping along side the rod increases the diameter and therefore requires a larger hole than necessary for the cable. This little tool allows you to "thread" the tool into the end of the cable, and pull it through with ease.  No more trying to straighten the cable so it hits all the holes going through.  Whoever came up with this is a lifesaver AND a time saver for wiring professionals.

    Was this review helpful to you?

    Browse for more products in the same category as this item:

    Categories > Drilling, Running & Fishing > Push Pull Rods (Glow Rods)
    Cable Installation > Wire Fishing Tools
    Categories > Drilling, Running & Fishing
    Cable Installation
    Categories > Drilling, Running & Fishing > Push Pull Rods (Glow Rods) > Thread-It Push Rods