Home > Categories > Installation Supplies > Hardware > Anchors >

MacLean Anchor Rod - 3/4in x 66in

MacLean Anchor Rod - 3/4in x 66in

 
Alternative Views:
TTS PRICE: $53.99

STATUS:  IN STOCK


Availability:
Normally Ships Same Day

PRODUCT CODE: MSI-J6526WCA
QUANTITY:

  
PRODUCT DESCRIPTION
 

HIGHER SHIPPING COST: Due to its length, this product exceeds standard carrier size limits and FedEx applies an oversize handling surcharge. The good news: the surcharge only applies to the first item, so additional units typically add very little to the shipping cost.

The No-Wrench Anchor from MacLean can be placed with power equipment or by hand. MPS No-Wrench Anchors are made of a forged eye anchor rod with a welded helix and angle-cut tip.

The J6526WCA anchor is ideal for use in medium dense to loose soils. The final installed height of the exposed anchor should be 8 to 12 inches above grade level. No-Wrench anchors are Hot Dip Galvanized per ASTM A123.

All No-Wrench Anchors have 3 Guy Attachments.

Specifications:
  • Quantity: 1
  • Helix Diameter: 6in
  • Rod Diameter: 3/4in
  • Rod Length: 5.5ft
  • Weight: 12lbs

    • Ultimate Holding Strength (Lbs-force):
  • Soil Class 8: 1,000lb (454kg)
  • Soil Class 7: 2,000lb (907kg)
  • Soil Class 6: 4,000lb (1,814kg)
  • Soil Class 5: 6,500lb (2,948kg)

    • Use the Anchor Hat for easier installation!

    NOTE: Installing procedures and embedment depth must be followed to assure the anchor load capacity.


    Like this product? Share your thoughts with our other customers! Be the first to write a review

    Browse for more products in the same category as this item:

    Categories > Installation Supplies > Hardware > Anchors
    Categories > Installation Supplies > Hardware


    RMT Laser Source & Optical Power Meter -50 to +26 w/LC $349.99
    Lineman Solutions 2in Bucket Hook $18.99
    Inno Instrument V7 High Precision Cleaver for Ribbon & Flat $526.50