Home > Categories > Connectors & Adapters > Adapters & Converters > F Adapters >

3Ghz Right Angle Coax F Adapter

3Ghz Right Angle Coax F Adapter

 
TTS PRICE: $1.89

STATUS:  IN STOCK

Free Shipping

Availability:
IN STOCK & READY TO SHIP

PRODUCT CODE: F90-HR
QUANTITY:

PRODUCT DESCRIPTION
 

Holland Electronics right angle adapters are one of the highest quality 3GHz adapters available on the market today. Holland's Patented Pin seizure mechanism offers twice the pin contact area and holding force as compared to conventional right angle adapters. This allows for the higher current handling required by newer satellite systems and offers long-term reliability.

Advantages of Holland's Premium Design

Lower Insertion Loss:
  • The F90-HR has approximately 1/3 the insertion loss of standard adapter at higher frequencies.(Savings of over .5 dB at 2 GHz).

    • Higher Return Loss:
  • With a return loss of over 35 dB @1 GHz, as compared to 13 dB for standard adapters, the F90-HR can assure a higher match resulting in faster digital speeds. The F90-HR series exceeds current SCTE minimum RL levels of 20 dB.

    • Round, Multi-Point Seizing Pin:
  • The patented multi-point seizing pin provides a larger contact area than standard, dual flat pin splices. This results in lower contact resistance and thus higher current handling capability when needed, as well as a greater resistance to long term center conductor oxidation. The patented design also creates a mild wiping action which removes a few microns of oxidation upon insertion.

    • Beryllium Copper Seizing Pin
  • The use of the more expensive beryllium copper material for the center conductor seizing pins insures a greater holding force than the traditional phosphor bronze or copper pins used in standard splices. The advanced material also maintains a higher spring tension over repetitive insertions.

    • Accepts a Wider Range of Cable Center Conductors:
  • Due to the greater elastic capability of beryllium copper, the F90-HR series can accept a wider variation in cable center conductor sizes and maintains its high strength on the smallest cables even after repetitive insertions of the largest cables.

    • Specification Sheet.

    Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 16 WRITE A REVIEW

      So far, this Product Review was helpful to 0 TTS Customers.
     
    5 of 5 Best choice Thursday, May 11, 2023
    Reviewer: Scott from Minnetonka, MN United States  
    In general, avoid using right angle adapters when possible, but sometimes they're the best choice for the situation. I've been forced to use other brands in a pinch, and I just don't trust them (had a few break). I've been using these Hollands for a year or so now and have never felt that way about them. They're sturdy, and so far, I have yet to replace one.

    Was this review helpful to you?

      So far, this Product Review was helpful to 0 TTS Customers.
     
    4 of 5 3Ghz Right Angle Coax F Adapter Wednesday, July 6, 2022
    Reviewer: Kerry LeMasters from New Martinsville, WV United States  
    I believe these are the good ones.  They appear not to just have a press fit but the back of the right angle has a pressed in cover that suggest it may be a solder connection as well.  Time will only tell and if one fails, I will find out how it is internally connected.  I would suggest these over the other 10 pack ones that Tech Tool has listed

    Was this review helpful to you?

      So far, this Product Review was helpful to 0 TTS Customers.
     
    5 of 5 Great Product Thursday, May 20, 2021
    Reviewer: Chris H from Lucas, TX United States  
    I have used these on many installs, both on DirecTV and over the air applications.  I have never had any issues with them and work very well.

    I would highly recommend them for anywhere you need a sharp bend and can't bend the coax.

    Was this review helpful to you?

      So far, this Product Review was helpful to 0 TTS Customers.
     
    5 of 5 Right product, right price Thursday, March 25, 2021
    Reviewer: GregoryP from Clarkston, MI United States  
    Confident based on specs that it would do the best job for me.  Correct.  No appreciable loss, throughput remained the same, and allowed me to move cabinetwork close to wall without stressing RG6 cabling.

    Was this review helpful to you?

      So far, this Product Review was helpful to 0 TTS Customers.
     
    5 of 5 Very Good Connector for F-Style Cabling Wednesday, February 17, 2021
    Reviewer: Dennis Smith from Sonora, CA United States  
    This connector adapter was very good quality. I chose it because of the high frequency rating in my application and its low loss. Other F- style connectors are less expensive but have higher loss at the higher frequencies.

    Was this review helpful to you?

    View All Customer Reviews

    Browse for more products in the same category as this item:

    Categories > Connectors & Adapters > Adapters & Converters > F Adapters
    Categories > Connectors & Adapters > Adapters & Converters


    RG6, RG59, RG11 / F, RCA, BNC Compression Tool $68.99
    Platinum Tools 30pc Security Bit Set $31.08
    Klein 10-in-1 Phillips, Flathead, Torx, Square Screwdriver $17.03
    Ultra-Safe Single D Ring Fall Protection Harness - X-Large $89.99
    Greenlee 12 Inch Adjustable Wrench w/Dipped Handle $46.99
    Platinum Tools RJ45 Boot (7mm) - Red 25pc $2.48
    Cable Prep Replacement Blade for MRT $17.99
    Tru-Cut Wood Bell Hanger Bit - 3/8in x 24in $13.99
    Rexford Tools 4pc Terminator Repl Set 1-4 $5.80