 |
 |
 |
|
The Miller fiber optic crimp tool delivers positive, full-cycle crimps on fiber optic connectors.
Its ratcheting action will not release until the crimp is complete, so every connector is crimped the same way. This Model 2 (39840-2) comes fitted with jaw set 39845.
Pick the model whose jaw set matches your connectors.
All four models share the same durable steel frame and cushioned non-slip grips - see the chart below.
Features:
Ratcheting action for positive, full-cycle fiber optic connector crimping
Durable steel frame
Interchangeable jaws for common fiber optic connectors
Jaw set 39845: Square 0.042in (1.07 mm); Hex 0.068in (1.73 mm), 0.078in (1.98 mm), 0.128in (3.25 mm), 0.151in (3.84 mm), 0.178in (4.52 mm)
Cushioned non-slip handle grips
Specifications:
Model: Miller Model 2 (Ripley Part # 39840-2)
Jaw Set: 39845
Crimp Sizes: Square 0.042in (1.07 mm); Hex 0.068in (1.73 mm), 0.078in (1.98 mm), 0.128in (3.25 mm), 0.151in (3.84 mm), 0.178in (4.52 mm)
Material: Steel
Handles: Cushioned non-slip grips
Length: 8.6in (218 mm)
Weight: 1.1 lb (500 g)
Available Jaw Sets:
| Part # | Model | Ripley # | Connector Crimp Sizes | Jaw Set Part # |
|---|
| MIL-39840-1 | Model 1 | 39840-1 | Square 0.043in (1.09 mm); Hex 0.068in (1.73 mm), 0.100in (2.54 mm), 0.137in (3.48 mm), 0.213in (5.41 mm), 0.255in (6.48 mm) | 39844 |
| MIL-39840-2 | Model 2 (this item) | 39840-2 | Square 0.042in (1.07 mm); Hex 0.068in (1.73 mm), 0.078in (1.98 mm), 0.128in (3.25 mm), 0.151in (3.84 mm), 0.178in (4.52 mm) | 39845 |
| MIL-39840-3 | Model 3 | 39840-3 | Square 0.042in (1.07 mm); Hex 0.068in (1.73 mm); Oval 0.133in (3.38 mm), 0.162in (4.11 mm), 0.195in (4.95 mm) | 39842 |
| MIL-39840-4 | Model 4 | 39840-4 | Square 0.042in (1.07 mm); Hex 0.068in (1.73 mm), 0.151in (3.84 mm), 0.178in (4.52 mm), 0.213in (5.41 mm) | 39843 |
|
|
|
 |
|
 |
|
Skip to content
