How many times have you struggled to mark a hole because your pen or pencil wouldn't reach the marking surface? Chances are, it's happened so many times you've lost count! Worse, when you can't properly mark the hole, the hardware gets hung crooked or in the wrong position.
Design: Sola has solved this issue by designing this incredible heavy-duty mechanical pencil / marker. The diameter of the marker's neck is less than 1/4in and it can reach depths of over 1-3/4in.
Operation: Like a conventional mechanical pencil, when you push the button on the back of the marker, it feeds out approximately 2mm of lead. When you are finished, simply hold the button and push the lead back in to protect the tip.
Built-In Sharpener: The MArker's rear button screws off to reveal a small sharpener. This allows for putting an extremely fine tip on the lead at any time, within seconds!
Specialty Lead: The Marker comes pre-loaded with one special universal lead. The lead is a special combination of Graphite and Wax engineered to work on Stone, Concrete, Brick, Dry Wood, Paper, Cardboard, Wet Wood, Metal, Tile, and Ceramic.
ABS Handle: The Markers handle is constructed of a rugged ABS plastic. The built-in clip is strong enough to be secured on a belt or inside a tool pocket.
Replacement Lead: A 6-Pack of Replacement Lead is available for purchase here.
Optional Color Wax: Sola also has optional red and yellow colored wax tips available (not included). You can purchase those separately here.
Size: 153mm Long x 15mm Diameter (22mm Thick at clip)
Shaft Diameter: 5.75mm
Shaft Length: 41.54mm
Operating Temperature: -10°C to +40°C (14°F to 104°F)
1x Mechanical Pencil/Marker
1x Graphite/Wax Lead
Picture shows both mechanical pen and lead in and out of unit. Only 1 lead is provided.