 |
 |
 |
|
Swift KR7 is an advanced ribbon splicer that can provide quality terminations for up to 12 fibers at once. Additionally, the KR7 uses a user-friendly GUI for installer convenience.
Features:
4.3-inch color LCD monitor with touch screen & bidirectional operation system
Powerful lithium polymer battery with large capacity
Portable thermal manual stripper, NO CRACKS ON ribbon fibers: IHS-12
Equipped with sleeve loader to easy fiber loading for ribbon fiber
Internet remote access maintenance
User friendly GUI
Powerful lithium polymer battery with large capacity
Performs 200 cycles of fusion splicing and sleeve heating with the standard battery
Resistance to shock, dust and water:
The splicer with high reliability has stable performance even in a harsh environment
l Shock-Free Fall: 76cm from 5 sides l Waterproof: IPx2 l Dustproof: IP5x
4.3-inch Color LCD Monitor with Touch Screen:
Magnification : 20X, MAX 55X
For user’s convenience, LCD monitor has been designed with touch screen in addition to the operation keys
Bidirectional Operation System:
For user’s ergonomic preference, the screen can be turned around for one’s chosen viewing direction.
Equipped with Sleeve Loader to Prevent Contamination and to Provide Convenience:
While working in a manhole, the loader prevents the supplementary sleeve from falling and being contaminated.
Working in aerial space such as telephone pole, the loader also prevents the supplementary sleeve from falling down.
Auto-Calibration:
Detects the surrounding environment of temperature, humidity, air pressure and measures discharge calibration rate automatically.
Specifications:
Fiber alignment: Fixed V-Groove(Clad to Clad)
Applicable type of fibers: SM(ITU-T G.652), MM(ITU-T G.651), DS(ITU-T G.653), NZDS(ITU-T G.655)
Fiber count: Single fiber, 2~12 fiber
Applicable fiber dimensions
Single: Cladding diameter 125μm, Coating diameter 250, 900μm Ribbon: Cladding diameter 125μm, Ribbon fiber thickness 0.25 to 0.40mm
Fiber setting and cleaved length: 0.40in
Splicing modes: Splice mode: 100, Heat mode: 100
Typical splice loss: SM: 0.05dB, MM: 0.02dB, DS: 0.08dB, NZDS: 0.08dB
Return Loss: > 60dB
Splicing Time: Typical 16sec with standard SM(ITU-T G.652)
Splice loss estimate: Available
Sleeve heating time: 1~2 core 20sec, 4~12 core 50sec
Applicable protection sleeve: 1.6in, 2.4in(fiber), Micro
Storage of splice result: The last 10,000 results to be stored in the internal memory.(Image 10,000 results)
Tension test: 2N
Operating condition: Altitude: 5,000m above sea level, Temperature: -14°F~122°F, Humidity: 0~95%, Wind: 15m/s, non-condensing, dust proof, water proof, shock proof
Storage condition: Temperature: -40°F~176°F, Humidity: 0~95%
Dimension: 5.6(W) x 6.4(L) x 5.7(H)in (Including rubber)
Weight: 4.4Ib(Including battery 5.5Ib)
Viewing method and display: Two CMOS cameras and 4.3-inch color LCD monitor with touch screen
Fiber view and magnification: 20X, MAX 55X
Power supply: DC Lithium polymer battery(DC 14.8V, 6000mAh), 100~240V AC Adapter
No. of splice cycles with battery: 200cycle
Electrode life: More than 1,500 times
Terminals: USB, External Power (DC 12V Available for car cigar jack) DC Output 13.2~16.8V
Included:
1 - Arc Fusion Splicer: KR7
1 - AC Adapter: S311
2 - Sleeve Loader: S312
1 - Spare Electrode: EI-22
1 - Battery Pack: K713
1 - Alcohol Dispenser
1 - Cooling Tray: CT-03(60mm)
1 - Holder: H7-12
1 - Manual Stripper (DC): IHS-12
1 - Cleaver: CI-03RT
1 - DC-Output Cable
1 - Tool Box
1 - User Manual
1 - Carrying Case
1 - Hard Case
1 - Allen wrench
1 - Soft brush
KR7 Manual
|
|
|
 |
|
 |
|
|
|
