Home > Categories > Test & Measurement >

Triplett Low Voltage Pro 30SR

Triplett Low Voltage Pro 30SR

Alternative Views:

TTS PRICE: $563.99


Normally Ships Same Day



Triplett's LVPRO30SR is the big brother of all testing devices. It's as robust as the LVPRO30 and comes equipped with 8 smart remotes to add to your arsenal of network testing tools.

Have you ever wanted a tester that did the whole low voltage job? A tester with super-accurate cable testing plus testing APPS for many of the low voltage devices you work on every day? Devices such as switches, PoE, CCTV, and Dolby speaker installations? If you are one of those people, then The Low Voltage Pro (LVPro) is the tester family for you.

More and more cable installers are now doing "device" installations... installing IP phones, IP cameras, CCTV equipment. They are working with devices like switches, PoE power, and surround sound speakers. Cable testing is still a significant part of the job, but only one part of the more important job.

But that's not to say we have forgotten about bread and butter quality cable testing. All models of the LVPro include the basic CABLE TEST APP that includes TIA586 tests (opens, shorts, split pairs) plus ohms. Also, included with all LVPro models is the Length-RLQ APP, a comprehensive test package that includes length and "RLQ" (Return Loss Quality).

Features All Apps, Preloaded:
  • Cable Test Pack - Cable diagram, Pass/Fail, Delay, Skew, Ohms 1% HQ Length included with LVPro 2 and 3
  • Wall Jack ID - Locate multiple wall jacks for CAT5/6 and coax. Requires Remote kit(s)
  • Speaker 7.1 ID - Especially designed to properly map and label A/V speaker wires. Requires remote kit
  • Speaker Pop - Locate speakers by audibly popping them. Alligator clips included with all LVPRO Models.
  • Port Blink - Locate a cable connection to a switch port by blinking the switchs Link LED
  • Toner Locator - Place a tone on one end and detect it on the far end. Requires remote tone probe.
  • Alert LEDs - Two LEDs quickly alert you to an active switch connection or voltage on the line.
  • Length - Get perfect length, all wire types. Use built-in VOP values or calibrate with your cable. Adds length readout to Cable Test App (cable length, distance to open or short).
  • RLQ - Return Loss Quality tests for load mismatches that affect the wires power and data transfer capability.
  • Printing Results - Store for later printing up to 250 tests (all cable types). USB and software included
  • Battery Load - (test alarm system and other backup batteries by doing a loaded battery test)
  • CCTV Signal - CCTV systems require a minimum of 1Vpp to DVR. Measure and display Vpp of video signal.
  • Phone Volts - Detect central office telephone connections. Display voltage and cable location (up to 4 phones)
  • PoE Volts - Detect PoE voltage and display its amplitude and location on the cable (midspan, endspan or both))
  • 10/100/1000 Detection/Display - Plug into any active port (computer, switch, VoIP, access point) and display its capabilities

  • Specifications:
  • Cable Types Tested: Shielded and unshielded twisted pair. All cable categories Coax. All types Telephone, speaker and alarm wire
  • Cable Tests: Opens, shorts, reversals, split pairs, wiremap, propagation delay, skew, ohms. Feet and metric selectable
  • Advanced Cable Tests: Length and distance to fault Adjustable and standard VOP settings for accurate length of all cables RLQ (Return Loss Quality)
  • Locating cable ends, split wires and switch ports: Wall jack identifiers (RJ45, coax, and mixed kits available) Speaker identification (Qty 8 available separately) Port blink. LVPRO lights the LED on the port switch
  • Device Tests Speakers: audible popper
  • Voltage Protection: DC Volts: 100V / AC Volts: 70
  • Printed Reports: Stores 250 cable test reports in memory
  • Backlit Display: Off and 2 brightness levels

  • Length Measurement:
  • Max (all wire types): 1000 feet (305m)
  • Min split pairs: 6 feet (2m)
  • Min RLQ: 20 feet (7m)
  • VOP calibration: Min cable sample 150 feet (50m)

  • Network Devices:
  • 10/100/1000 advertised speed and cable pairs used
  • PoE pairs and cable pairs used
  • CCTV camera video signal: measure peak to peak volts
  • CATV (cable TV) requires min 30mV peak to peak signal
  • Battery test:1 00mA loaded test for 12V alarm and other batteries

  • Battery:
  • Type: 4 AA alkaline
  • Life: 24 to 30 hours
  • Auto power off: 30 minutes

  • Contents:
  • Detachable Remote
  • F Male to BNC Male
  • F Male to BNC Female
  • 2 - RJ45 patch cables
  • RJ45 to alligator clip adapter
  • USB cable
  • 4 - AA batteries
  • Carrying case
  • 8 - Smart Remotes

  • Product Manual
    Compare the Low Voltage Pro to JDSU (Test-Um) Products

    Like this product? Share your thoughts with our other customers! Be the first to write a review

    Browse for more products in the same category as this item:

    Categories > Test & Measurement
    Categories > Test & Measurement > Cable Mappers and Toners
    Categories > Test & Measurement > Cable Mappers and Toners > 20-Way Mappers
    Categories > Test & Measurement > CCTV Meters
    $200+ to Spend