The 96306 Parachute Buckle Harness from UltraSafe is a full body safety harness equipped with a D-ring on the back's center as well as on each side of the hip. The back D-ring is made for fall arrest and the side D-rings are for positioning.
While working in a bucket or basket, workers must wear fall protection equipment with the lanyard connected to an anchor point on the boom or bucket/basket. 1910.67 requires this because mechanical failures have resulted in buckets flipping or separating from the boom, causing workers to fall. Incidents also have occurred in which line trucks have been struck by passing vehicles, launching a worker out of the bucket.
The 96306 is only a single part of your fall arrest system. Look to your local and national OSHA/ANSI guidelines for more details on fall protection safety.
Maximum Capacity: 400lbs
Certified: OSHA & ANSI Z359.1-07 / A10.32-2012
ULTRA-SAFE, INC. products are manufactured in accordance with the guidelines provided by OSHA compliant harness and ANSI regulations. As such, with all products provided and/or manufactured for fall protection or fall restraint by ULTRA-SAFE, INC. The compatibility of using other brand name and/or manufacturers products can be used together and be in compliance, as long as the other brands and/or manufactures meet the same guidelines, and the products are used in the manner they were designed for. Always inspect before each use, and read and understand all manufactures instructions.