Home > Categories > CAT/UTP Prep & Termination > Untwist Tool >

Untwist Tool V2 CAT5e/CAT6 Pair Separator

Untwist Tool V2 CAT5e/CAT6 Pair Separator



 
Alternative Views:


TTS PRICE: $99.99

STATUS:  IN STOCK


Availability:
Normally Ships Same Day

PRODUCT CODE: UTT-UNTWIST-V2-1FP
QUANTITY:

PRODUCT DESCRIPTION
 

Exciting News! On 03/24/2022 the Untwist Tool V2 won a SIA Award at the ISC West Show in Las Vegas!

WHY THE UNTWIST TOOL? Our customers have been searching for a better way to separate CAT5e and CAT6 pairs for years. Many installers drag a small screwdriver through the pairs, some spin the cable's outer jacket through the pairs, and some just untwist the pairs by hand. All three of these methods require continuous use of your fingertips, and on larger installs, can leave your fingertips sore for days. The Untwist tool is simple to use, fast, and eliminates that pain in your fingers!

UNTWIST OPERATION: The operation of the tool is simple! Press the untwist button on the driver and the tool's head starts spinning. Slowly feed the pair into the tool's head and release the button when the pair is untwisted.

STRAIGHTENING OPERATION: Once the pairs are untwisted there are two ways to straighten them. One, you can press the wire against the mouth of the tool head before removing the untwisted pairs. Two, you can use the straightening grooves on the side of the tool head.

BATTERY LIFE: The Untwist Tool V2's driver untwists approximately 2400 pairs before the driver needs to be recharged.

RECHARGING: The battery only takes 45 minutes for a full recharge and can also be used while charging!

Features:
  • Untwist CAT5E/CAT6 Pairs FAST!
  • Saves Your Fingertips on Large Jobs
  • Eliminate Damage to Twisted Pair During Separation
  • High-Quality Construction
  • Untwist Tool Head is Made in the USA
  • Simple to Use

  • UNTWIST TOOL HEAD Specifications:
  • Size: 1.81in x .65in // 46mm x 16.5mm
  • Weight: .2oz
  • Shaft Size: 4mm // .156" (5/32")
  • Bit Material: S2 Alloy Steel
  • Patent Pending

  • UNTWIST DRIVER Specifications
  • Driver Material: Aluminum
  • One Button Operation
  • LEDs: Three
  • Rated Speed: 200RPM
  • Rated Torque: 0.15/3NM
  • Battery Type: Lithium
  • Charging Port: Micro USB
  • Charging Time: 40 Minutes
  • Size: 15mm x 173mm // .6in x 6.8in

  • Includes:
  • 1x Untwist Tool V2
  • 1x Rechargeable Driver
  • 1x USB Charging Cable
  • 1x Coupling Boot
  • 1x SGB Storage Bag
  • 1x Operation Manual

  • Operation Manual

    Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 17 WRITE A REVIEW

      So far, this Product Review was helpful to 0 TTS Customers.
     
    5 of 5 Once the techs used it they love it April 27, 2022
    Reviewer: Billy Mullins from Texas  
    I have some staff that are newbies and vets to cable pulling, we pull cat 6 into some odd places and a lot of the time several drops. The veteran pullers love it, one or 60 cable ends they all like using it to separate the wires, there was a learning period I showed them how to use it and once they saw it in use it was a lot easier getting the cable ends ready for termination, using the side of the tool to straighten the wires was the biggest reaction, they tried doing all eight, they found using 3 or 4 wires at a time was faster.

    Was this review helpful to you?

      So far, this Product Review was helpful to 0 TTS Customers.
     
    5 of 5 How Much is your Time Worth to You? April 20, 2022
    Reviewer: M. Jones from Wisconsin, United States  
    I bought V1 and disappointed they didn't offer discounts to those that purchased it and then V2 but I have to say V2 works much better.  It isn't perfect, but as you get used to it I can blow through terminations like never before.  Some of you say it's "overpriced".  On strictly what you are getting alone I can't dispute that, BUT you are missing the point. For me $100 or $200, etc it paid for itself in a day.  How much do you value your time and time saved? Is it worth $100 to you if you do this for a living? So it's not the little $10 tool that you are paying $100 for, it's the concept/idea someone came up with.  That's what you are paying for and the time it will save you far exceeds $100 so stop complaining about the price!!

    Was this review helpful to you?

      So far, this Product Review was helpful to 0 TTS Customers.
     
    4 of 5 Amazing tool. Costs a bit too much April 10, 2022
    Reviewer: Tristan Roylance from Riverton, UT United States  
    I love this tool. It has saved me a bunch of time and finger pain. The screw driver tool tip combo is a great product combo but is a bit pricey as you don’t get any of the tools to use the screw driver as a screw driver. If you buy the tool tip alone it’s way too much, around $50 for just one. All that aside I don’t regret buying this tool at all I use it everyday and have only had to charge it once.

    Was this review helpful to you?

      So far, this Product Review was helpful to 0 TTS Customers.
     
    5 of 5 A tool like this is absolutely essential! March 4, 2022
    Reviewer: Sean J. from New Jersey, United States  
    I’m convinced people will complain about anything. Unless they know something about untwisting by hand that no one ever told me. Because I was never this efficient when I had a whole IDF to cut down. Honestly cat5e isn’t bad to untwist by hand, but I still can’t untwist the 4 pairs as fast as I can with you tool, and trust me the skeptical 66 year old that works for me part time and has been in the industry for 30 years thought I was wasting my money until he saw what I was doing with it.

    For cat6 and above a tool like this is absolutely essential. Untwisting enough cat6 or cat6a will take the skin off my fingers and render me useless the next day. Don’t listen to the naysayers and keep pushing this product.

    Was this review helpful to you?

      So far, this Product Review was helpful to 0 TTS Customers.
     
    5 of 5 Where was this tool 6 years ago? February 21, 2022
    Reviewer: James O'Shea from United States  
    Next month I will be working on a project with almost 900 runs and I am so glad a buddy of mine tagged me on one of the Low Voltage Facebook group posts. Even thought I was skeptical at first I decided to try it. Someone else said there is a learning curve, which is correct to certain extent but overall I love it! Honestly I wish I had this sooner. Battery holds up pretty good and I am impressed with the quality.

    Was this review helpful to you?

    View All Customer Reviews

    Browse for more products in the same category as this item:

    Categories > CAT/UTP Prep & Termination > Untwist Tool
    Categories > Hand Tools > Telecom Tools > Untwist Tool
    Categories > Hand Tools > Telecom Tools
    Categories > CAT/UTP Prep & Termination
    Categories > Hand Tools
    Categories