Home > Categories > Test & Measurement > Networking >

Wire Length Tester - 3-200 Meters

Wire Length Tester - 3-200 Meters

Alternative Views:

TTS PRICE: $76.99


Normally Ships Same Day



The NF-8209 is a new generation to offer digital and analog signaling all-in-one network toner and probe. It has three modes for options to track cable digital mode, analog mode, and PoE mode. That means it's equipped with the most powerful cable location technologies for any work environment. Also, it includes cable length measurement, cable faults testing, PoE testing, hub blink, and NCV function; all these make it a must-tool for cabling engineers.

  • Digital or analog mode, the tone generator sends strong, clear toning to let you find cables faster. If the cable you need to identify is plugged in a PoE switch, the PoE scan mode will make the cable tracing more precise
  • Wire map testing can check 5 common connection problems including open, short, cross, split, and reversed pairs, measure the length of LAN cables with range of 2.5m - 500m, test the info of PoE devices such as PoE voltage, power supply polarity and mode, type of PSE (AF or AT standard)
  • Port flash feature enables you to locate network ports by flashing port light on switches or routers, and will tell you the connected switch’s info like its speed, transmitting mode, and protocol
  • Bright and easily discernible LCD making it much easier to use
  • Cable issues can be easily identified and tracked just by looking at the visual and well-lit tester display
  • Non-contact voltage (NCV) detecting
  • Receiver (tone probe) can detect AC voltage presence
  • Certification passes RoHS, FCC, and CE compliance testing

  • Transmitter Specifications:
  • Cable Type: CAT5、CAT6 (STP & UTP)
  • Max Range: 600m
  • Test Range: 2~200m
  • Accuracy: ±1.6m
  • Scan Frequency: 130KHz
  • PoE Test Range: DC 5~60V standard / non-standard PoE switch
  • PoE Type: IEEE 802.3af/at
  • LCD Display: 128*64 Dot-matrix with backlight
  • Power Supply: AAA*3 (Not included)
  • Low Battary Warning: 2.7V
  • Auto-off Time: 15min, 30min, 60min, OFF
  • Voltage Protection: DC48V 5mA
  • Max Working Current: <150mA

    Like this product? Share your thoughts with our other customers! Be the first to write a review

    Browse for more products in the same category as this item:

    Categories > Test & Measurement > Networking
    Categories > Test & Measurement
    Categories > Cable Prep & Termination > Cable Mappers and Toners
    Categories > Test & Measurement > Cable Mappers and Toners
    Categories > Test & Measurement > Cable Mappers and Toners > 8-Way Mappers
    Categories > Test & Measurement > Cable Mappers and Toners > Toners & Probe Kits
    Categories > Cable Prep & Termination