Jameson 32-FS-375 Tri-Hole Fiber Optic Stripper - 3-Hole, Jacket to 125 Micron Fiber

Jameson's 32-FS-375 Fiber Optic Strippers feature three (3) openings to handle typical fiber stripping jobs. It strips without scratching or nicking glass fiber, taking the 1.6-3 mm fiber jacket down to the buffer coating, the buffer coating down to 250 micron, and the 250 micron coating down to the 125 micron glass fiber.

Manufacturer's Note: During inspection, ground surfaces must be held perpendicular to the viewing angle as deviation from this will distort shape and size of hole. Tools should be tested at least every 6 months or after performing the equivalent of (500) 25mm strips, whichever occurs first. The test period should be reviewed annually to determine if more frequent testing is required. Tools should be stored clean and dry to eliminate surface corrosion. Any tool that fails to meet established standards should be replaced.