Jonard JIC-1022 Wire Stripper & Cutter - 10-22 AWG Wire, 2-3 mm Fiber Jackets
The JIC-1022 Wire Stripper and Cutter from Jonard is designed to strip and cut the most commonly used stranded and single wire gauges 10 to 22 AWG and 2-3 mm fiber jackets. It strips 2-3 mm jackets off fiber optic cable without damaging the fiber.
Features:
Strips 2-3 mm fiber jackets without damaging the fiber
Coil spring opening reduces hand fatigue
Wire looping and bending holes conveniently located
Locking mechanism
50 HRC black oxide finish for strength and durability
Cutting edges are hardened, tempered and ground for superior cutting and stripping
Specifications:
Wire Gauge: 10-22 AWG stranded & solid copper
Fiber Jacket: 2-3 mm diameter
Cut Type: Cut & Strip
Blade Material: Hardened, tempered and ground steel
Finish: Black oxide
Dimensions: 6.5" x 1.88" x 0.47" (16.51 x 4.76 x 1.19 cm)
Weight: 0.30 lb (136 g)
CIFA #: 13784
Model: JIC-1022
Available Sizes:
| Part # | Jonard # | Wire Gauge |
|---|
| JIC-1022 | JIC-1022 (this item) | 10-22 AWG (2.6 to 0.60 mm) Copper Wire, 2 to 3 mm Diameter Fiber Jackets |
| JIC-1626 | JIC-1626 | 16-26 AWG (1.3 mm-0.40 mm) |
Data Sheet - Wire Stripper 10-22 AWG - JIC-1022
Skip to content
so far so good 
cutters /strippers 
