Vanco EVSP14SC 4K HDMI 1-4 Splitter with EDID and Scaling

Home > Categories > Low Voltage Equipment > AV Distribution & Extenders >

4K HDMI 1×4 Splitter with EDID and Scaling

Alternative Views:

TTS PRICE: $248.99

STATUS:

IN STOCK

Availability:

IN STOCK & READY TO SHIP

PRODUCT CODE: VAN-EVSP14SC

QUANTITY:

PRODUCT DESCRIPTION

The Evolution by Vanco EVSP14SC HDMI splitter with 4K, 4:4:4, and HDR pass-through splits one source signal to multiple displays. This splitter is also able to downscale to 1080p, allowing 4K resolution to be maintained on other outputs. It also features EDID management with different modes to ensure compatibility with source and display combinations. The EVSP14SC supports LPCM 7.1CH, Dolby TrueHD, and DTS-HD Master Audio for advanced audio setups. Take any 4K source and split the signal to multiple displays while connecting both 4K and 1080p displays to ensure the highest quality possible resolution. A great solution for applications with a mix of 4K and 1080p displays!

Features:

Transmits audio and video from a single source to 4 displays up to 4K (2160p) Ultra High Definition resolution without any loss of quality or resolution

Supports 4K and 1080p resolutions simultaneously; downscales to 1080p for lower resolution displays while maintaining 4K on other outputs

Supports up to 4K@60Hz with 8 bit YCBCR and 4:4:4 color sampling

Supports up to 4K@60Hz with 10 bit YCBCR, 4:2:0 color sampling and HDR

HDCP 2.2 and 1.4 compliant

Wide frequency range: 25MHz~600MHz

High bandwidth: 18Gbps

Features EDID management

Micro-USB firmware update for expanding compatibility

Dimensions: 4.43” W x 3.43” H x 1.6” D

Specifications:

HDMI Compliance: HDMI 2.0a

HDCP Compliance: HDCP 2.2/1.4

Video Bandwidth: 600MHz/18Gbps

Video Support: HDR 4K@60Hz (4:2:0 10 bits)/ 4k@60Hz (4:4:4 8 bits)

Audio Support: DTS-HD Master Audio, Dolby TrueHD Dolby Digital, DTS, LPCM

ESD Protection: Human Body model: ±15kV (air-gap discharge) ±8 kV (contact discharge)

Firmware Update: Feasible via Micro-USB port

Input Ports: 1 × HDMI (Female type)

Output Ports: 4 × HDMI (Female type)

HDMI Connector: Type A (19-pin female)

Dip Switch: EDID Mode Selection

Dimensions: 4.43” W x 3.43” H x 1.6” D

Weight: 0.3 lbs

Chassis Material: Metal

Mounting: Wall-Mounting Case

Power Supply: 5V 1A DC

Power Consumption: 3 Watts (maximum)

Operating Temperature: 0 °C~40 °C/ 32 °F~104 °F

Storage Temperature: −20 °C ~ 60 °C/−4 °F ~140 °F

Relative Humidity: 20~90 % RH (non-condensing)

Like this product? Share your thoughts with our other customers! Be the first to write a review

Browse for more products in the same category as this item:

Categories > Low Voltage Equipment > AV Distribution & Extenders
Categories > Low Voltage Equipment

	Single Port Tap / Directional Coupler - 6dB $2.39
	MegaPro Hex (Allen) DoubleLok Bit 2.50-4.00mm $6.59
	Ripley Miller ACS+ Cable Slitter $127.99
	Klein Tools 6mm Cushion Grip Nut Driver $10.02