Home > Categories > Low Voltage Equipment > AV Distribution & Extenders >

4K HDMI 1×2 Splitter with EDID and Scaling

4K HDMI 1×2 Splitter with EDID and Scaling

 
Alternative Views:
TTS PRICE: $180.99

STATUS: ON ORDER

Free Shipping

Availability:
SHIP ESTIMATE 5-7 DAYS

PRODUCT CODE: VAN-EVSP12SC
QUANTITY:

PRODUCT DESCRIPTION
 

The Evolution by Vanco EVSP12SC HDMI splitter with 4K, 4:4:4, and HDR pass-through splits one source signal to multiple displays. This splitter is also able to downscale to 1080p, allowing 4K resolution to be maintained on other outputs! EVSP12SC features EDID management, with different modes to ensure compatibility with source and display combinations. The EVSP12SC supports LPCM 7.1CH, Dolby TrueHD, and DTS-HD Master Audio for advanced audio setups. Take any 4K source and split the signal to multiple displays while connecting both 4K and 1080p displays to ensure the highest possible resolution. A great solution for applications with a mix of 4K and 1080p displays!

Features:
  • Transmits audio and video from a single source to 2 HDMI outputs up to 4K2K (2160p) Ultra High Definition resolution without any loss of quality or resolution
  • Supports 4K and 1080p resolutions simultaneously; down scales to 1080p for lower resolution displays while maintaining 4K on other outputs
  • Supports up to 4K@60Hz with 8 bit YCBCR and 4:4:4 color sampling
  • Supports up to 4K@60Hz with 10 bit YCBCR, 4:2:0 color sampling and HDR
  • HDCP 2.2 and 1.4 compliant
  • Wide frequency range: 25MHz~600MHz
  • High bandwidth, 18Gbps
  • Features EDID management
  • Micro-USB firmware update for expanding compatibility
  • Dimensions: 3.75” W x 2.25” H x 1.6” D

    • Specifications:
  • HDMI Compliance: HDMI 2.0a
  • HDCP Compliance: HDCP 2.2/1.4
  • Video Bandwidth: 600MHz/18Gbps
  • Video Support: HDR 4K@60Hz (4:2:0 10 bits)/ 4k@60Hz (4:4:4 8 bits)
  • Audio Support: DTS-HD Master Audio, Dolby TrueHD Dolby Digital, DTS, LPCM
  • ESD Protection: Human Body model: ±15kV (air-gap discharge) ±8 kV (contact discharge)
  • Firmware Update: Feasible via Micro-USB port
  • Input Ports: 1 × HDMI (Female type)
  • Output Ports: 2 × HDMI (Female type)
  • HDMI Connector: Type A (19-pin female)
  • Dip Switch: EDID Mode Selection
  • Dimensions: 3.75” W x 2.25” H x 1.6”D
  • Weight: 0.2 lbs
  • Chassis Material: Metal
  • Mounting: Wall-Mounting Case
  • Power Supply: 5V 1A DC
  • Power Consumption: 3 Watts (maximum)
  • Operating Temperature: 0 °C~40 °C/ 32 °F~104 °F
  • Storage Temperature: −20 °C ~ 60 °C/−4 °F ~140 °F
  • Relative Humidity: 20~90 % RH (non-condensing)

    • Products in video: 4K HDMI 1×4 Splitter with EDID and Scaling.


    Like this product? Share your thoughts with our other customers! Be the first to write a review

    Browse for more products in the same category as this item:

    Categories > Low Voltage Equipment > AV Distribution & Extenders
    Categories > Low Voltage Equipment


    Veto Pro Pac Parts Bags - 4 Pack $66.36
    DFS Con-Sert Hex Screws w/ Drill Bit, #8 x 1/2in - 100ct $16.14
    White Electrical Tape [UL] $2.59
    Wiha Conduit Reamer and 6inOne Multi-Driver $34.18