Arlington MB5751 Non-Metallic Mounting Block - 5/8" Lap Siding, 5" x 7", White Paintable
Arlington's MB5751 gives you a smooth, flat mounting surface on 5/8" lap siding for A/C disconnects, cable and fiber demarcs, ground blocks, cameras, and other exterior equipment. The one-piece, non-metallic base installs after the siding is up - position it with a flat-head screw, mount your device through the block into the sheathing, and caulk the top and sides.
A drain hole at the bottom edge keeps water and dirt from collecting behind the block, and the textured UV-rated surface takes paint so it blends into the home's exterior. Mounting blocks like the MB5751 also help installations meet NEC 2020 code compliance for A/C disconnects.
Different siding profile? See the MB5741 for 1/2" lap siding or the MB5771 for Dutch lap siding.
Features:
One-piece, non-metallic base installs easily after the siding is up
Helps meet NEC 2020 code compliance for A/C disconnects
Drain hole prevents water and dirt from collecting on the lower edge
Textured, paintable surface blends with the home's exterior
UV-rated, extra-duty plastic for long outdoor service life
Specifications:
Siding Type: 5/8" Lap Siding
Height: 7"
Width: 5"
Color: White (paintable)
Material: UV-rated non-metallic plastic
Weight: 0.217 lbs/each
Model: MB5751
Related Products:
| Part # | Arlington # | Description |
|---|
| ARL-MB5741 | MB5741 | Non-metallic mounting block for 1/2" lap siding, white |
| ARL-MB5771 | MB5771 | Non-metallic mounting block for Dutch lap siding, white |
Siding Mounting Bases Specification Sheet
Skip to content
