(Your shopping cart is empty)

Shopper Award

  Home > Test & Measurement >

Rexford Tools 8-Way Coaxial Cable Mapper w/ Belt Case

Rexford Tools 8-Way Coaxial Cable Mapper w/ Belt Case

Alternative Views:

TTS PRICE: $49.99


Normally Ships Same Day



This handy 8-Way coax mapping device allows you to test and identify up to EIGHT cables with just ONE trip to the junction box! You will wonder how you ever did without it! The RTC-CM08 is a hand-held coax mapping device designed to locate and identify installed wires and to test multi-run coax systems terminated with F-connectors. This unit also features a built in inductive toner for sending an inductive tone signal on a coax cable.

Operation of the RTC-CM08 Coaxial Cable Mapper is simple! Install the included F-Type Identifiers on up to 8 cables or wall plates. Go to the head-end where the other end of all the cables are located, connect the cable, and push the button. It is that easy! The Readout on the RTC-CM08 Coaxial Cable Mapper will display the number associated with the Identifier at the other end.

  • Eliminates Headaches Mapping Wires
  • Simple One Button Operation
  • Map 8 Cables in a Single Trip!
  • Includes: Belt Carry Case
  • Battery Type: 2 x CR2032 (included)

  • Specifications:
  • Test Results Auto Power Off: 20 seconds
  • Inductive Tone Generator Auto Power Off: 30 minutes
  • Maximum cable length for testing: 3000ft
  • Maximum DC cable resistance (Shield + Center Conductor): 100 ohms

  • Kit Includes:
  • (1) Main Mapper Unit
  • (8) Thread-On ID Caps (1-8)
  • (1) F-81 Barrel Adapter
  • (1) Clip on Cordura Carry Case

  • Click Here to View Specifications Sheet [PDF 700KB]
    Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 19 WRITE A REVIEW

      So far, this Product Review was helpful to 0 TTS Customers.
    4 of 5 Great tool but... March 1, 2020
    Reviewer: Vincent Cinalli Jr. from Sewell, NJ United States  
    I love this mapper!  The only thing I can complain about is the case wears out after a month of use.  The zipper starts shredding and the pulls break making the case useless.  I work as cable tech and I carry this everywhere and need the case to be durable.  Can we get a way to just order a replacement case?

    Was this review helpful to you?

      So far, this Product Review was helpful to 0 TTS Customers.
    4 of 5 8 way coax mapper May 31, 2019
    Reviewer: Daniel S from San Diego, CA United States  
    Overall a great time saving device. I only used it as a cable mapper, not some of the other functions such as a toner and cable testing - I am assuming the cable resistance testing. The mapper worked so well for the money if the other functions work it is really a great value for the price.
    A couple reasons to drop one star is there in not a way to store F 81's attached to the numbered fittings inside the case. There are 4 open spots in the case to load a couple fittings to keep with the mapper but it would be nice to be able to keep them threaded together. Another idea would be to include a push on F connector for the display side of the tester. Threading the tester on to each piece of coax may add some wear an tear to the port the barrel screws into. Not a big deal and again, for the cost this is a great value.

    Was this review helpful to you?

      So far, this Product Review was helpful to 0 TTS Customers.
    5 of 5 Great tool at a great price May 28, 2019
    Reviewer: Q from spokane, WA United States  
    I have worked in the telco industry for 6-7 years. I have worked as a contractor for the cable company, the telephone company,  in-house for a WISP, and currently run my own IT/Networking company. I wish I had bought this when I was working for the cable company.  I usually used a $20 cable mapper used 4 colored terminators for the mapping. This maps 8 and the case zips down the right way to leave it on your belt/pocket when in use. The actual mapper would likely fall out if you tried walking with the case open but all 8 terminators are held in place great. It has 4 extra holes beyond the 8 for the terminators which I plan on making F to CAT5 adaptors that will hopefully fit in those places. I have not had a chance to use this in the field as of yet but have tested it with a few cables in my house. No issues seen. I tried using the tone generator and was unable to get a tone from my non-contact emitter but I had not read the instructions so that could be my fault.

    Was this review helpful to you?

      So far, this Product Review was helpful to 1 TTS Customers.
    4 of 5 Great Toner BUT April 22, 2018
    Reviewer: Gary Feith from Berlin, MD United States  
    I really like this toner the replaceable barrel is a big selling point for me. Only down side is I go thru 1 a year due to the soldering points that hold the barrel go out and it becomes very wobbly.

    Was this review helpful to you?

      So far, this Product Review was helpful to 1 TTS Customers.
    5 of 5 I liked it for as long as I had it. February 15, 2018
    Reviewer: Nicholas Sennett from Newark, OH United States  
    I like the small size but it needs a loop far a carabinier. I set this little guy down one day and never saw it again.

    Was this review helpful to you?

    View All Customer Reviews

    Browse for more products in the same category as this item:

    Test & Measurement
    Test & Measurement > Cable Mappers and Toners
    Test & Measurement > Cable Mappers and Toners > 8-Way Mappers
    Test & Measurement > Cable Mappers and Toners > Rexford Tools Cable Mappers
    $50 to Spend
    Cable Installation

    Company Info | Domestic Shipping Policies | Canadian Shipping Policies | Secure Shopping | Returns & Exchanges
    Product Index | Category Index | Help | Terms of Use

    Copyright © Tech Tool Supply, LLC. All Rights Reserved.
    Built with Volusion
    Blank Gradient Login Logoff New Customer BG New Customer My Account Wholesale BG Wish List Wholesale