The bit holder is the sloppiest link in most power-driving setups: backlash in the socket, wobble at the tip, and a bit change that needs two hands and a free pocket.
Wiha's CentroFix 71480 is the precision answer. Its special holding mechanism locks any 1/4" hex-drive bit with minimal run-out — the tip spins true instead of orbiting — which is the difference between bits that seat and bits that chew fastener heads at drill speed.

The quick-release is genuinely one-handed.
Insert a bit and the CentroFix locks it; slide the EasyOut sleeve and the bit releases — fluid single-handed operation for fast production bit changes. And unlike most quick-release holders, the CentroFix also holds double-ended bits (including Wiha's 26-in-1 double bits), doubling what one holder carries to the job.

The materials are full Wiha: hardened chrome-vanadium-molybdenum tool steel at HRC 59-61, built to the C6.3 (1/4" hex) ISO standard.
At 60 mm (2.4") long it fits every standard 1/4" hex-shank tool — drills, impact drivers, production screwdrivers — and it's ideal for all power tool applications where precision and speed both matter. If your current holder came free in a bit set, this is the upgrade you'll feel on the first screw.

• CentroFix locking mechanism holds all 1/4" hex-drive bits with minimal run-out
• Quick-release EasyOut sleeve: slide to unlock, true one-handed bit changes
• Also holds double-ended bits (works with Wiha 26-in-1 double bits)
• Hardened chrome-vanadium-molybdenum tool steel, HRC 59-61
• Fits standard 1/4" hex drive shank tools; ideal for power tool applications
• ISO C6.3 standard; 60 mm (2.4") length

• Model: Wiha 71480 CentroFix
• Drive: 1/4" hex (ISO C6.3)
• Length: 60 mm (2.4")
• Material: Chrome-vanadium-molybdenum tool steel, hardened
• Hardness: HRC 59-61
• Weight: 0.09 lb
• UPC: 084705714806