GMP 91268 1/2" Toneable Continuous Duct Rodder - 1000 ft (305 m), 18 AWG Copper Core
The GMP 91268 Toneable Continuous Duct Rodder is engineered for high-performance duct locating, tracing, and cable installation across long conduit runs. Featuring a 1/2 inch (12 mm) fiberglass rod embedded with an 18 AWG copper conductor, this rodder provides continuous tone transmission when used with standard signal transmitters and receivers - eliminating the need for digging or trenching. With a 1000 ft (305 m) reach, it's an essential tool for fiber optic, telecom, and power utility professionals.
Built for durability and reliability, the 91268 combines a high-visibility orange fiberglass rod with a rugged tubular steel carrier, powder-coated for superior corrosion resistance. Large, airless tires ensure easy transport over rough jobsite terrain, while the integrated hand-operated brake provides full control during payout and retrieval. With precise 2 ft length markings and a sturdy frame design, this toneable rodder delivers accuracy, convenience, and field performance.
Features:
1/2 in. (12 mm) toneable fiberglass rod with embedded 18 AWG copper conductor
18 AWG copper wire runs inside the fiberglass core and connects directly to the end fittings; clip the transmitter lead to the female end fitting and run the other lead to a ground stake
Toneable (detectable) rod lets you trace and map duct routes with a signal transmitter and receiver, without digging or trenching; also compatible with a sonde
1000 ft (305 m) rod length ideal for long-distance conduit runs
Marked every 2 ft for quick and accurate distance measurement
Compatible with standard signal transmitters and receivers for precise duct tracing
High-visibility orange rod ensures superior visibility on the jobsite
Rugged, powder-coated tubular steel carrier for long-lasting durability
Large, airless tires for easy mobility on uneven or rough surfaces
Hand-operated brake for controlled payout and retrieval
Includes male threaded end fitting with tapered head and female threaded rear fitting
Perfect for, route tracing, and fiber or electrical cable installation
Specifications:
Rod Diameter: 1/2 in. (12 mm)
Rod Length: 1000 ft. (305 m)
Weight: 177 lbs.
Rod Material: High-visibility fiberglass with embedded 18 AWG copper conductor
Conductor: 18 AWG copper wire, connected to the end fittings
Markings: Length marked every 2 ft
Carrier Construction: Powder-coated tubular steel alloy
Brake Type: Hand-operated manual brake
Wheel Type: Large, maintenance-free airless tires
End Fittings: Male threaded end with tapered head; female threaded rear fitting
End Fitting Threads: 3/8-16
Rated Tensile Strength: 21,000 lbs.-f (95.2 kN)
Rated Pull Strength: 1,800 lbs.-f (8.0 kN)
Minimum Bend Diameter: 18 in. (450 mm)
Carrier Dimensions: 45 in. Dia x 46 in. L x 18.5 in. W x 52.75 in. H (1143 x 1168 x 470 x 1340 mm)
Model: 91268
Available Lengths:
| Part # | GMP # | Rod | Length |
|---|
| GMP-91258 | 91258 | 1/2 in. (12mm) toneable | 500 ft (152m) |
| GMP-91264 | 91264 | 1/2 in. (12mm) toneable | 800 ft (244m) |
| GMP-91268 | 91268 (this item) | 1/2 in. (12mm) toneable | 1000 ft (305m) |
Replacement Parts:
| Part # | GMP # | Description |
|---|
| - | 88337 | Replacement 1/2 in. toneable rod, 1000 ft |
Accessories:
| Part # | GMP # | Description |
|---|
| GMP-88426 | 88426 | Duct rodder accessory kit for 1/2 in. toneable rod, with canvas pouch |
| GMP-88419 | 88419 | Splice repair kit for 1/2 in. toneable rod |
Related Products:
| Part # | GMP # | Description |
|---|
| GMP-90268 | 90268 | 1/2 in. x 1000 ft standard (orange, non-toneable) duct rodder |
How to Service a Broken Toneable Rod (Splice)
How to Service a Broken Toneable Rod Male Fitting
How to Service a Broken Toneable Rod Female Fitting
Skip to content
