A light 3/16in fiberglass duct rodder with 150ft of rod for drops, hand-holes and inside runs.
The GMP 89280 is built for running conduit inside and out and for home drops from hand-hole boxes to buildings, and it is strong enough to pull duct - rated to 350 lb pull. The non-conductive fiberglass composite rod has a polypropylene outer layer for water, oil and chemical resistance, and the powder-coated tubular steel frame has an integrated brake with the carrier turning on two heavy-duty ball bearings. GMP rates it 10%+ lighter than the leading competition.

• 150ft (45.7 m) of 3/16in (4.5 mm) non-conductive fiberglass composite rod
• Polypropylene outer layer resists water, oil and chemicals
• Rated pull 350 lbf; rated tensile 1,400 lbf
• Powder-coated tubular steel frame with integrated brake
• Rod carrier runs on 2 heavy-duty ball bearings
• 10%+ lighter than the leading competition
• Accessory kit included: flexible leader, replacement ends, swivel coupling, tapered head and carrying pouch

• Model: GMP 89280
• Rod: 3/16in (4.5 mm) x 150ft (45.7 m)
• End Fitting Threads: 1/4-20
• Rated Tensile Strength: 1,400 lbf (6.2 kN)
• Rated Pull Strength: 350 lbf (1.6 kN)
• Minimum Bend Diameter: 5.3in (135 mm)
• Carrier: 16.25in dia. cassette; 16.25 x 8 x 21.13in
• Repair Parts: 89346 male fitting, 89347 splice, 89348 female fitting; 89344 flexible leader, 89345 swivel coupling, 89349 tapered head
• Weight: 11.3 lb