If you work with wire or cable, we know you are going to be as excited as we are about this Wire Marker. This product is perfect for identifying wires in a pre-wire, phasing of an electrical panel, or any other reason you'd want to change the color of a wire in your closet! When we received some samples from the guys over at U-Mark, we were geeked! Finally, a simple solution to replace electrical tape!
There are so many applications for these markers in so many industries. CAT5E/6/7, Fiber, Electrical, Coaxial Cable, HVAC, Automation, AV... this list goes on and on! In seconds you can change the color of any wire, add an identifying mark to a cable, or simply paint a spot where you can write down the wire or cable's name! The capabilities are endless - So many uses!
Available Sizes and Colors:
Black (Up to 7mm / #6)
Blue (Up to 7mm / #6)
Brown(Up to 7mm / #6)
Gray (Up to 7mm / #6)
Green (Up to 7mm / #6)
Orange (Up to 7mm / #6)
Pink (Up to 7mm / #6)
Red (Up to 7mm / #6)
Violet (Up to 7mm / #6)
White (Up to 7mm / #6)
Yellow (Up to 7mm / #6)
Black (Up to 19mm / 3/4in)
Blue (Up to 19mm / 3/4in)
Brown (Up to 19mm / 3/4in)
Gray (Up to 19mm / 3/4in)
Green (Up to 19mm / 3/4in)
Orange (Up to 19mm / 3/4in)
Red (Up to 19mm / 3/4in)
White (Up to 19mm / 3/4in)
Yellow (Up to 19mm / 3/4in)
Phasing of electrical panels
Color coding and identification of circuits
CAT-5 ethernet cable
HDMI, audio/video, and other low-voltage cables
Perfect for prewires, data closets, head-ends, and anywhere identifying wire by color is useful!
10 times more mileage than vinyl tape, at a 20% lower cost
Faster, easier to apply, and handle
No need to purchase and carry color-specific wire when you can quickly mark wire remnants.
Marks MCM wire up to 3/4in quickly and efficiently with highly visible, quick-drying paint. Resists abrasion, moisture, dirt, oil, and UV light. Adheres to clean sheath permanently.
Pass electrical inspections the first time by properly identifying all wire colors.
Perfect for phasing of electrical panels, color coding, identifying and wiring circuits, marking computer and telephone cables, automotive wires, etc.
The patented design is the result of a lot of hard work and ingenuity (U.S. Patent No. 7,320,553)
Style: Valve Activated
Dimensions 6.25" x 1" (158mm x 25mm)
Drying Time: Approx 90 Seconds
Marking Temp Range: 0° to 110° Fahrenheit (-18° to 44° C)