Home > Categories > Installation Supplies > Labeling >

U-Phase Large Permanent Wire Marker - Gray

U-Phase Large Permanent Wire Marker - Gray



 
Alternative Views:


TTS PRICE: $7.80


STATUS:  IN STOCK


Availability:
Normally Ships Same Day

PRODUCT CODE: UMK-10717MCM
QUANTITY:

PRODUCT DESCRIPTION
 

If you work with wire or cable, we know you are going to be as excited as we are about this Wire Marker. This product is perfect for identifying wires in a pre-wire, phasing of an electrical panel, or any other reason you'd want to change the color of a wire in your closet! When we received some samples from the guys over at U-Mark, we were geeked! Finally, a simple solution to replace electrical tape!

There are so many applications for these markers in so many industries. CAT5E/6/7, Fiber, Electrical, Coaxial Cable, HVAC, Automation, AV... this list goes on and on! In seconds you can change the color of any wire, add an identifying mark to a cable, or simply paint a spot where you can write down the wire or cable's name! The capabilities are endless - So many uses!

Available Sizes and Colors:

Small:
  • Black (Up to 7mm / #6)
  • Blue (Up to 7mm / #6)
  • Brown(Up to 7mm / #6)
  • Gray (Up to 7mm / #6)
  • Green (Up to 7mm / #6)
  • Orange (Up to 7mm / #6)
  • Pink (Up to 7mm / #6)
  • Red (Up to 7mm / #6)
  • Violet (Up to 7mm / #6)
  • White (Up to 7mm / #6)
  • Yellow (Up to 7mm / #6)
  • Large:
  • Black (Up to 19mm / 3/4in)
  • Blue (Up to 19mm / 3/4in)
  • Brown (Up to 19mm / 3/4in)
  • Gray (Up to 19mm / 3/4in)
  • Green (Up to 19mm / 3/4in)
  • Orange (Up to 19mm / 3/4in)
  • Red (Up to 19mm / 3/4in)
  • White (Up to 19mm / 3/4in)
  • Yellow (Up to 19mm / 3/4in)

  • Typical Uses:
  • Phasing of electrical panels
  • Color coding and identification of circuits
  • CAT-5 ethernet cable
  • HDMI, audio/video, and other low-voltage cables
  • Automotive wire

  • Features:
  • Perfect for prewires, data closets, head-ends, and anywhere identifying wire by color is useful!
  • 10 times more mileage than vinyl tape, at a 20% lower cost
  • Faster, easier to apply, and handle
  • No need to purchase and carry color-specific wire when you can quickly mark wire remnants.
  • Marks MCM wire up to 3/4in quickly and efficiently with highly visible, quick-drying paint. Resists abrasion, moisture, dirt, oil, and UV light. Adheres to clean sheath permanently.
  • Pass electrical inspections the first time by properly identifying all wire colors. Perfect for phasing of electrical panels, color coding, identifying and wiring circuits, marking computer and telephone cables, automotive wires, etc.
  • The patented design is the result of a lot of hard work and ingenuity (U.S. Patent No. 7,320,553)

  • Specifications:
  • Style: Valve Activated
  • Dimensions 6.25" x 1" (158mm x 25mm)
  • Drying Time: Approx 90 Seconds
  • Marking Temp Range: 0 to 110 Fahrenheit (-18 to 44 C)

    Average Customer Review: Average Customer Review: 1 of 5 1 of 5 Total Reviews: 1 WRITE A REVIEW

      So far, this Product Review was helpful to 0 TTS Customers.
     
    1 of 5 Total Junk October 14, 2021
    Reviewer: MICHAEL BURNETT from Plano, IL United States  
    We purchased a number of these markers for a large wire pull. The electricians spent 30 minutes attempting to make them work before tossing them aside and using phasing tape. Do not waste your time. This seemed like a good idea but the performance is not there.


    <BR><BR><B>** Tech Tool Supply Response: </B> Thank you for your Review!  These markers come with a dry tip and need to be primed before the first use.  If your electricians need help priming the ink, please give us a call 877-208-6657 and we will walk you through it.

    Was this review helpful to you?


    Browse for more products in the same category as this item:

    Categories
    Categories > Installation Supplies > Labeling
    Categories > Installation Supplies