![](/v/vspfiles/templates/techtoolsupply/images/DBox_Border_Left_Top.gif) |
![](/v/vspfiles/templates/techtoolsupply/images/clear1x1.gif) |
![](/v/vspfiles/templates/techtoolsupply/images/DBox_Border_Right_Top.gif) |
![](/v/vspfiles/templates/techtoolsupply/images/clear1x1.gif) |
The XR-TS2-01 from Applied Instruments is a tuner module for use with the
XR-3 Modular Test Instrument Base Unit. It allows for testing North American DBS and Broadcast TVRO.
Which XR-3 Module Is Right For You? and Benefits Sheet
Features:
Compatible with XR-3 Modular Test Instrument
Friendly user interface
Satellite ID by "align-to-lock" or "automatic scan“
ID multi-lock algorithm eliminates false positives
Powers LNBs and multi-switches
Use for L, C, X, Ku, or Ka band applications
High sensitivity assures alignment optimization
Geo-sensitive "Field Guide" software database stores all compatible satellites and transponders per global region
Program and store up to 256 custom transponders
Controls multi-LNBs/switches with 22kHz DiSEqC tone
Manually tune to custom transponders using front panel keypad
Audible tone for signal lock or peak
Store measurements for proof-of-performance reporting
"Limit Scan" Pass/Fail for key transponders
Displays antenna settings (AZ / EL / Skew) based on user's postal code or latitude and longitude coordinates
Field replaceable type F barrel connectors
Fast system boot-up time in less than 5 seconds
Measurements:
Demodulates DVB-S, DSS / DIRECTV Legacy, Digicipher 2, Turbo FEC, & DVB-S2 (QPSK & 8PSK, CCM) signals
Signal Level (dBm, dBmV, or dBμV) with present and peak bar graph
Signal Quality (IRD, C/N, Eb/No, or Es/No)
BER (Pre FEC / Viterbi & Post FEC / Reed Solomon) for DVB-S, DSS / DIRECTV Legacy, and Digicipher 2 signals
Bad blocks, corrected blocks, and frame errors for DVB-S2 and Turbo FEC signals
Voltage output of IRD / IDU (29V max)
Current draw of LNB
LNB frequency deviation (LNB LO drift estimate)
Symbol Rate error
Spectrum Screen (frequency on x-axis, amplitude on y- axis)
Constellation Screen (I and Q demodulator values)
Specifications:
Frequency Range: 250-2150 MHz
Tuning Resolution: 4 kHz
Signal Level Range: -75 to -15 dBm (+34 to +94 dBμV)
RF Level Accuracy: +/- 2 dB typical, 3 dB max
Signal Lock Formats: DVB-S (QPSK), Digicipher 2 (QPSK & OQPSK), DVB-S2 (QPSK & 8PSK, CCM), DSS / DIRECTV Legacy (QPSK), Turbo (QPSK & 8PSK)
Impedance: 75 Ohm
LNB Power: 13VDC for V/R, 18VDC for H/L21VDC for DIRECTV SWiM, 29VDC
Switch Control: 22 kHz, DiSEqC
RF Connector: Type F barrel, field replaceable
Warranty: 12 month limited
Specifications are subject to change without notice.
|
|
![](/v/vspfiles/templates/techtoolsupply/images/clear1x1.gif) |
![](/v/vspfiles/templates/techtoolsupply/images/DBox_Border_Left_Bottom.gif) |
![](/v/vspfiles/templates/techtoolsupply/images/clear1x1.gif) |
![](/v/vspfiles/templates/techtoolsupply/images/DBox_Border_Right_Bottom.gif) |
![](/v/vspfiles/templates/techtoolsupply/images/clear1x1.gif)
|