Home > Categories > Fiber Prep & Termination >

New!  Noyafa NF-8508 Optical Wire Meter Tracer

Noyafa NF-8508 Optical Wire Meter Tracer

Alternative Views:

TTS PRICE: $141.79


Normally Ships Same Day



The NF-8508 is an Optical Wire Meter Tracer for home and public facility network cable repair. Its main functions include Multi-Function Network Cable Testing such as cable fault testing, cable length measurement, PoE testing, port flash, Crystal head QC test function, optical power meter, and a visual fault locator function. It has two modes for options to track both cable digital and analog modes, all these make it a must-tool for cabling engineers.

  • Measure 7 standard wavelengths, 850/1300/1310/1490/1550/1625/1650, test range -70dBm~+10dBm, 10mw red light source
  • Quickly and accurately locate a target wire in a bunch of wires with the receiver's anti-jamming probes, NCV, and adjustable sensitivity
  • For dim work environments, LED lights are ideal
  • Adjustable receiver sensitivity to locate cables deep in the ground, ceiling, or wall
  • Tests the faults of short circuit, open circuit, and cross in a LAN network
  • Measures the length of CAT5 / CAT6 cables up to 200m, it can be measured in meters, yards, or feet
  • Test the information of standard PoE device, such as PoE voltage, power supply polarity, power supply mode and also the type of PSE (af or at standard)
  • Determine the corresponding connection port by observing the same blink frequency on the switch/router port where the target cable is connected
  • High-definition screen that displays all parameters and functions visually
  • Tests the quality of the crimping of crystal heads
  • Set backlight off and auto shutdown times, and charge the built-in lithium battery with a universal type-C cable
  • Passes RoHS, FCC, and CE compliance testing, and Noyafa is certified to the ISO 9001 standard

  • Specifications:
  • Cable Type: CAT5 / CAT6
  • Voltage Protection: 60V
  • Battery: Type C Charge

  • Transmitter Specifications:
  • Wiremap Port: RJ45
  • MAX Range: 300m
  • STP/NTP: Yes
  • Digital/Analog Mode: Yes
  • Scan Frequency: 455KHz
  • Full Duplex / Half Duplex: Automatic Identification
  • Auto-Nego / Non-Auto-Nego: Automatic Identification
  • 10m/100m/1000m: Automatic Identification
  • Length: <20M +/-l.6M, 20M~ 100M +/-2.4M, >.100M+/-3.2M
  • NVL: 10Mw
  • Power Meter: 850/1300/1310/1490/1550/1625 (Wavelength)
  • Crimping: RJ45-8 Cores; Min length is 2:10cm
  • Low Voltage Warning: <3.5V 0.1V
  • Power Supply: 3. 7V 1500mAh Polymer lithium battery
  • Size: 148 X 70 X32 mm

  • Receiver Specifications:
  • Sensitivity Adjustable: Yes
  • MAX Range: 300m
  • Digital/Analog Mode: Yes
  • MAX Working Current: <300m
  • NCV: Yes
  • Lamp: Yes
  • Low Voltage Warning: Yes
  • Power Supply: 3. 7V 1500mAh Polymer lithium battery
  • Size: 198 x 50 x 28 mm

    Like this product? Share your thoughts with our other customers! Be the first to write a review

    Browse for more products in the same category as this item:

    Categories > Fiber Prep & Termination
    Categories > Test & Measurement
    Categories > Fiber Prep & Termination > Power Meters
    Categories > Fiber Prep & Termination > Visual Fault Locators