Jameson’s 32-FS-375 Fiber Optic Strippers features three (3) openings to handle typical fiber stripping jobs. It strips without scratching or nicking glass fiber.

Manufacturer's Note: During inspection, ground surfaces must be held perpendicular to the viewing angle as deviation from this will distort shape and size of hole. Tools should be tested at least every 6 months or after performing the equivalent of (500) 25mm strips, whichever occurs first. The test period should be reviewed annually to determine if more frequent testing is required. Tools should be stored clean and dry to eliminate surface corrosion. Any tool that fails to meet established standards should be replaced.